Pneumatic ball valveCharacteristics and Applications
This ball valve is mainly used to cut off or connect media in pipelines, and can also be used for fluid regulation and control. Compared with other valve types, it has the following advantages.

1. Low fluid resistance, ball valves have the lowest fluid resistance among all valve types, even for reduced diameter ball valves, their fluid resistance is quite small.
2. The thrust bearing reduces the friction torque of the valve stem, which can make the valve stem operate smoothly and flexibly for a long time.
3. The valve seat has good sealing performance, and the sealing ring is made of elastic materials such as polytetrafluoroethylene. The structure is easy to seal, and the sealing ability of the ball valve increases with the increase of medium pressure.
4. The valve stem seal is reliable. As the valve stem only rotates without lifting, the packing seal of the valve stem is not easily damaged, and the sealing ability increases with the increase of medium pressure.
5. Due to the good self-lubricating properties of materials such as polytetrafluoroethylene, the friction loss with the ball is small, resulting in a long service life of the ball valve.
6. The bottom mounted valve stem and the protruding step at the head of the valve stem prevent the valve stem from spraying out. In the event of a fire causing damage to the valve stem seal, the protruding step can also form a metal contact with the valve body to ensure the valve stem seal.
7. Anti static function: Install springs between the ball, valve stem, and valve body to dissipate static electricity generated during the switching process.

actuator
Adopting a new series of GT type pneumatic actuators, with double acting and single acting (spring reset), gear rack transmission, safe and reliable; The large-diameter valve adopts a series of AW type pneumatic actuator fork type transmission, with a reasonable structure and large output torque, and is available in double acting and single acting types.

1. Gear type dual piston, with large output torque and small volume.
2. The cylinder is made of aluminum material, which is lightweight and aesthetically pleasing.
3. Manual operating mechanisms can be installed at the top and bottom.
4. The rack and pinion connection can adjust the opening angle and rated flow rate.
5. The actuator can be equipped with live signal feedback indicators and various accessories to achieve automated operation.
6. The IS05211 standard connection provides convenience for the installation and replacement of products.
7. The adjustable screws at both ends provide a ± 4 ° adjustable range for standard products between 0 ° and 90 °. Ensure synchronization accuracy with the valve.

The options for attachments can be selected based on different controls and requirements, including the following attachments:

Cut off accessories: single electric control solenoid valve, dual electric control solenoid valve, limit switch feedback device.
Adjustable accessories: electrical locator, pneumatic locator, electrical converter.
Air source processing accessories: air filter pressure reducing valve, air source processing triad.
Manual mechanism: HVSD manual control mechanism

Execution standards
1. Design and Manufacturing: GB12237-89、API608、API 6D、JPI 7S-48、BS5351、DIN3357。

2. Flange size: JB/T74～90（JB74～90）、GB9112～9131、HGJ44～76、SH3406、ANSI B16.5、JIS B2212～2214、NF E29-211、DIN2543。

3. Structural length: GB12221-89、ANSI B16.10、JIS B2002、NF E29-305、DIN3202。

4. Main Test Inspection: JB/T 9092、API 598。

Pneumatic ball valvePerformance specifications

Ordering Instructions
When placing an order, please fill out the "Specification Form" or indicate the following content:
oneIf the model has not been selected before ordering, please provide us with your usage parameters: 1. nominal diameter, rated flow coefficient KV,
2. Fluid properties (including nominal pressure, temperature, viscosity, or acidity/alkalinity), 3. Valve switch type, 4. Valve body and core materials, 5. Whether accessories are included and indicate the accessory model. So that we can make the correct selection for you.
twoIf the design unit has already selected the product model of our company, please order directly from our sales department according to the model;
threeWhen the application is very important or the pipeline is complex, please provide design drawings and detailed parameters as much as possible, and our experts will review and control them for you.

Thank you for visiting our website. If you have any questions You can call us and we will do our best to provide you with high-quality service!