The 50-250 pipe three jaw tractor is the most ideal equipment for towing large-diameter pipes with a diameter of 160 or more. The three tractor frames are distributed at a 120 ° angle, which can effectively clamp pipe products and prevent deformation. Both ends of the upper tractor cylinder are filled with air at the same time, and a pressure difference cylinder is used for compression. The tractor frame is not easy to loosen or slip. The following two towing frames are electrically lifted and lowered through a gearbox. Variable frequency speed regulation, with a wide range of speed regulation and uniform speed. The traction machine uses a forward and reverse switch, and the traction lead pipe can easily pass through the vacuum box to reach the front of the mold head. The humanized design makes the operation easier and more convenient.

Maintenance and upkeep of the 50-250 pipe three jaw tractor:

1. After the initial operation of the 50-250 pipe three jaw tractor for 10 hours, a comprehensive inspection should be conducted, and if necessary, each connecting part should be tightened once.

2. All parts of the 50-250 pipe three claw tractor must be kept clean, especially the inner wall of the mixing container and the material feeding hole should be cleaned thoroughly. If the equipment is not in use for a long time, the inner wall and discharge part should be coated with anti rust grease.

3. After the initial operation of the 50-250 pipe three jaw tractor for 10 hours, the tension of the V-belt should be checked. When adjusting the tension screw to evenly tighten the V-belt, the motor seat plate locking bolt must be tightened to prevent loosening.

Zhangjiagang Huade Machinery PE, PVC50-250 Pipe Three Claw Traction Machine Pipe Traction Machine

4. The 50-250 pipe three claw tractor needs to be regularly inspected and maintained. When vulnerable parts are damaged, they must be repaired and replaced in a timely manner.

5. Electrical equipment should be regularly inspected, especially the heater. If any damage is found, it should be replaced in a timely manner. 6. It is necessary to follow the operating procedures of the 50-250 pipe three claw tractor, which is the maintenance and upkeep of the equipment.

Zhangjiagang Huade Machinery PE, PVC50-250 Pipe Three Claw Traction Machine Pipe Traction Machine

Three claw tractor, model SGQ250

• Three claw traction
• Jiale frequency converter
• Track adjustment method: equipped with mechanical adjustment and pneumatic compression device

Technical Parameter

◆ Drive motor power: 3KW

◆ Maximum traction speed: 3m/min

The effective traction length of the track is 2000mm