With the continuous improvement of production environment requirements and the rise of product quality levels in wood processing enterprises. The large amount of dust and shavings generated by various woodworking machinery during the production process should be promptly collected in a centralized manner. Especially for various production lines such as medium density board, particleboard, flooring, etc., they are essential. During the process of processing wood into furniture, a lot of dust is generated, which can have a great impact on the health of workers. Therefore, manufacturers need to install furniture factory specific dust collectors, which, as the name suggests, are different from other equipment in some accessories. The difference lies in the fact that the dust removal bag is the most important one. Furniture factories must use anti-static dust removal bags for their dust collectors because the friction between wood chips and air can generate static electricity. If the static electricity is not treated properly, sparks can be formed. Therefore, anti-static bags must be selected when choosing bags.

　　Zhengzhou Furniture Factory Dust CollectorStructure: It consists of three parts: upper box, middle box, and lower box.

1. The upper box is equipped with anti rotating double arms. An electric motor is installed on the cover plate, which drives the rotating arm to rotate through a three-stage variable speed system consisting of a pulley, gearbox, and bevel gear. There are two reverse air vents on the rotating arm, which blow back the cloth bags in rows at a speed of 1 rpm. The purified air is discharged through the exhaust vents. In order to facilitate the inspection of whether the equipment is normal and leaking dust, observation holes are installed on the side of the upper box.

2. The central box is equipped with a flower board, lifting ring, filter bag and filter bag frame, as well as a suction port for dusty air.

3. The lower box is equipped with a fixed frame for the filter bag frame, as well as air ducts and ash discharge gates for the reverse blower. A reverse air blower is installed outside the body, with both the reverse air duct and suction duct mounted on the main body, forming a complete air path that is not affected by external humidity.

Zhengzhou Furniture Factory Special Dust Collector

The working process of the dust collector in Zhengzhou Jienengda Furniture Factory is to use a time relay to automatically control the relay gripper. Use the method of intermittent forward and reverse rotation of the relay fan to remove dust accumulation on the inner wall of the filter bag (i.e. wind oscillation). When oscillating, the dust content of the air increases. Two sets of dust collectors are used to oscillate alternately. When oscillating with wind, the dust laden air extracted from this set of dust collectors is discharged to another set of dust collectors, and then the air extracted from the other set of dust collectors is discharged to this set of dust collectors for filtration. By repeatedly oscillating several times in this way, the dust adhering to the bag wall can fall down. The dust removal principle of the furniture factory dust collector is introduced: the dust generated by woodworking equipment in production is collected by the dust collection system's suction duct, and then enters the woodworking dust collector through the regulating disc valve and inlet duct. The dust is trapped outside the filter bag, and the clean gas is discharged into the atmosphere through the filter bag, induced draft fan, and chimney to meet the standard. This not only achieves the purpose of recovering dust and purifying exhaust gas, but also meets the emission requirements of various emission indicators.

The dust collector of Zhengzhou Furniture Factory is installed on or near the dust dispersing equipment, and can also be installed on vehicles to make a mobile filter. This compact and flexible bag filter is particularly suitable for dust removal from hand dispersed dust sources. The woodworking dust collector produced by Huiyang is suitable for furniture factories, wooden door factories, flooring factories, wood product factories, density board factories, classical furniture factories, redwood furniture factories, camphor wood furniture factories and other woodworking industries.