Zhongke Environmental Testing/Anti Drip Sailor Holding Test Device

Product Usage: This product is mainly used to assess whether the casing and sealing components of electronic and electrical products can ensure good working performance after water testing or during testing. At the same time, it can detect the possible impact of water invasion on the product during transportation or use, providing reliable basis for product technical standards.

1、 Shower Head Test Device:
One set of lotus canopy sprinkler system; (Meets IPX3 and IPX4 protection levels)
⑵ Pressure gauge: 1 piece
⑶ Spray rate: 10 * (1 ± 5%) L/min
⑷ Water pressure: 50-150kPa
Number of holes: approximately 121
⑹ Material: Stainless steel or brass
⑺ Spray angle: adjustable from 0 to 45 degrees

Zhongke Environmental Testing/Anti Drip Sailor Holding Test Device

2、 Water spray test device
⑴ Spray nozzle diameter: ø 6.3mm (meets IPX5 protection level)
⑵ Spray nozzle diameter: ø 12.5mm (meets IPX6 protection level)
⑶ Spray water pressure: 30-100kPa
⑷ Spray rate: adjustable from 12.5 ± 0.625L/min to 100 ± 5L/min
⑸ Optimal spraying distance: 2.5-3 meters

3、 Device description and composition:
Device Description: This device is designed and manufactured in accordance with the technical requirements of IP x 3, IP x 4, IP x 5, and IP x 6 in the "GB4208-208 Degrees of Protection for Enclosures IP Code".
During the anti spray test, it can be moved to any suitable location for the anti spray test, and the flow rate, pressure, time, and spray range can be adjusted according to the required requirements. The experiment can be conducted immediately.
Device composition:
The experimental device consists of a water storage tank, a pressurized water pump, a pressure regulating valve, a flow regulator, a pressure gauge, a water pipe, a diversion device, and a spray bracket electrical control box.
Water storage tank: made of thickened high-grade brushed stainless steel argon arc welding, with dimensions of (800 × 800 × 1000mm).

4、 Water pressure control system:
1. Adjust the pressure with a flow meter
2. Pressure relief manual regulating water valve
3. Equipped with water filter

5、 Execution standards:
This set of products is manufactured strictly in accordance with the corresponding national standard technical parameters such as GB/T10485-2007, GB/T4208-2008, GB/T12480-90, GB/T2423.38-2005, GB/T4942.1-2006, GB/T4942.2-1993, GB7001, etc. It can also be manufactured non-standard according to customer requirements.

Optional parts:
Test turntable: 500mm (special requirements to be specified when ordering)
Turntable load capacity: 30-50KG (special requirements to be specified when ordering)
Spray head bracket: made of stainless steel