Main features of greenhouse roller shutter machine:
The greenhouse roller shutter machine is an electromagnetic brake roller shutter machine, which fills the gap in the roller shutter machine market and has obtained a national patent. It has achieved noise free, safer, and more flexible and convenient operation. The unique brake buffer extends the service life of the rolling shutter machine.
The unique separation device can easily roll and place straw curtains in any situation. Unique overload protection device, very safe to use. The new generation of fixed roller shutter machines is designed with dual brakes, eliminating brake hazards. The innovative design of the fast and slow speed combination makes it easy to use and adjust the speed freely, enabling the fixed roller shutter machine to truly achieve the goal of safety and practicality.
Installation steps of greenhouse roller shutter machine:
1. Pre weld various connecting joints and flanges onto the pipe; Determine the strength and length of the crossbars based on the length of the shed (generally, sheds below 60 meters use 2-inch high-frequency welded pipes with a wall thickness of 3.5; sheds above 60 meters use 2-inch pipes at both ends, except for 30 meters at each end, and 2.5-inch diameter high-frequency welded pipes on both sides of the main unit); Welding roller shaft teeth; If welding double pipes is required for double pipe uprights.
2. Connect the main unit of the greenhouse film rolling machine to the motor.
3. Lower the grass straw on the shed from the middle to both sides, aligning the bottom, and lay a non elastic rope under each straw.
4. Dig a pit and bury ground stakes in the center of the shed, 1.5-2 meters away from the shed.
5. Connect the support rod with a flexible knot and a pivot, stand it up, and connect it to the ground pile.
6. Connect the vertical pole to the host, and lay the horizontal pole for backup connection.
7. Connect the machine rod or scroll from the middle to both sides.
8. Fix the rope under the canopy onto the shaft teeth.
9. Connect the reverse switch and power supply of the greenhouse film rolling machine.
10. Test the machine and place some soft material on the slow rolling area to adjust the rolling speed until it rolls in a straight line.