Reaction vessels are widely used in industries such as petroleum, chemical, rubber, pesticides, dyes, pharmaceuticals, and food. They are pressure vessels used to complete processes such as vulcanization, nitration, hydrogenation, alkylation, polymerization, and condensation. The materials generally include carbon manganese steel, stainless steel, zirconium, nickel based alloys, and other composite materials.

The reaction kettle consists of a pot body, pot cover, stirrer, electric heating oil clamp tube, support and transmission device, shaft seal device, overflow tank, etc., and is equipped with electric heating rods and temperature and pressure gauges.

The stirring types of reaction vessels include various traditional slurry stirring, turbine stirring, propulsion stirring, anchor stirring, frame stirring, screw belt stirring, serrated disc stirring, etc. There are two types of support seats: suspended or supported. Thermal oil is placed inside the jacket and heated by an electric heating rod. The jacket is equipped with inlet and outlet holes for oil, overflow measurement, venting, as well as connecting holes for electric heating rods and temperature measurement. The outer wall of the jacket is welded with a support, and there is a discharge port at the bottom of the pot body. The traditional heating methods for reaction vessels mainly include thermal oil heating, electric heating, and steam heating. Users can choose according to their specific needs.

Characteristics of reaction kettle:
1.The inner tank body is made of stainless steel according to the process requirements（201，304，316L）Made of materials, the inner surface can be polished with a mirror finish, and can be cleaned and sterilized online to meet hygiene standards.
2.The jacket is made of stainless steel according to the process requirements(304、201)Or carbon steel(Q235-B)Wait.
3.Suitable diameter to height ratio design, customized mixing device as needed; The mixing shaft seal adopts a pressure resistant sanitary mechanical seal device to maintain the working pressure inside the tank and prevent unnecessary pollution and material loss caused by material leakage inside the tank.
4.The support type shall be suspended ear type or floor standing leg type according to operational requirements.