Specification for Intelligent Salt Spray Testing Machine

Product Name: Intelligent Salt Spray Testing Machine (Model 120A with Cylinder Head Opening Automatic System)

Model: ■ LX-120A

Specification Description:

1、 Experimental space(inside dimension)：□1200*800*500（W*D*H）cm

2、 Outer box sizeApproximately R2100 * 1150 * 1400mm (W * D * H) mm

4、 Power supply:220V single-phase 3.5KW 50HZ

5、 Materials：

(A) The laboratory uses PVC polyethylene board with a thickness of 8mm and a durable temperature of 85 ℃.

(B) The laboratory seal adopts PVC polyethylene board with a thickness of 8mm.

(C) The test drug replenishment bottle adopts a hidden water level gauge, which is easy to clean and not easy to break.

(D) The pressure air bucket is made of high pressure and high temperature resistant 304 stainless steel bucket.

(E) The laboratory basket frame adopts a flat dividing frame, which can adjust the angle freely. The fog falling and receiving aspects on all sides are completely consistent, and the number of test pieces placed is large.

(F) The storage rack can support a weight of 20KG

(G) The opening method of the upper cover is pneumatic (automatic)

6、 According toCNS.JIS.ASTMSpecifications,Meet the requirements of ISO9227, ASTM-B117, and GBT10125 standards

Adjustable constant temperature control, humidity greater than85%；

(A) Acetic acid salt spray test: ACSS

(1) Laboratory: 35 ℃± 1 ℃

(2) Pressure air tank: 47 ℃± 1 ℃

(B) Copper accelerated salt spray test: CASS

(1) Laboratory: 50 ℃± 1 ℃

(2) Pressure air tank: 63 ℃± 1 ℃

7、 Air supply systemThe air pressure is adjusted in two stages at 1kg/cm ²

The first adjustment is to use a 3kg/cm ² imported air filter with drainage function to provide air source for the upper cover; The second adjustment is to a pressure of 1kg/cm ²;

8、 Spray mode：

(A) The Bernoulli principle is used to extract saline water and then atomize it uniformly, without any obstruction or crystallization, ensuring the standard of continuous testing.

(B) Nozzle: Made of special glass nozzle, the spray volume and angle can be adjusted.

(C) Spray volume adjustment 1-2mI (mI/80cm ²/h) (16 hour average).

(D) Spray mode: continuous and indirect.

9Heating system：

Adopting direct heating method, the heating speed is fast and the standby time is reduced. When the temperature reaches ON/OFF switch, the temperature is precise and the power consumption is low (the heating tube is made of highly corrosion-resistant titanium tube).

10、 Control system:

(A) Adopting a touch screen control system;

(N) Water addition system: adopting automatic and manual water addition and replenishment systems, automatically or manually replenishing when the water level is too low

(O) Power supply configuration: AC contactor; 1 piece

10、 Safety protection device：

(A) When the water level is low, the power supply device is automatically cut off.

(B) When the temperature exceeds the limit, the power supply device of the heater will be automatically cut off.

(C) Equipped with safety warning light device.

11、 Interior Decoration

(A) Spray tower □ 2 sets

(B) Storage rack □ 1 set

(C) Storage stick □ 1 set

(D) 2 standard measuring cylinders

(E) Collectors □ 2 pieces

(F) Glass nozzle □ 2 pieces

(G) Mist removal system □ 1 set

(H) Lifting system □ 1 set

(I) 304 # stainless steel pulley bracket □ 1 set

★ Attachment:

Two bottles of sodium chloride (NacI) reagent (including one hydrometer), one 5000mL measuring cup, and one operating manual.