200A charging brush board brush block AGV automatic navigation car battery charging system: available in single pole, double pole, three stage, four stage, 15A, 20A, 35A, 60A, 80A, 100A, 150A, 200A, 250A and other specifications and models. It can be used for charging lithium batteries, lead-acid batteries, nickel hydrogen batteries, nickel cadmium batteries and other batteries. It can also be used in AGV navigation transport vehicle online charging system. The product is widely used in charging systems in fields such as power, railway, communication, logistics automation, national defense, petrochemicals, metallurgy, coal mines, etc.

200A charging brush board brush block

AGV brush blocks are a new product in today's society and a commonly used supplementary power supply device. They can be seen everywhere in daily life. So, what are the benefits that AGV brush blocks bring to people?
1. No matter where you are, you no longer have to worry about running out of power for the electric appliances you use;
2. AGV brush board brush block is a new type of supplementary power supply equipment developed based on battery charging and discharging technology, which can easily achieve automatic supplementary power supply and automatic discharge functions;
3. The structure design of AGV brush board brush block is reasonable, the technology is complete, and it is particularly convenient to use;
4. Due to its multiple usage locations, it has great convenience.

To achieve good results, it is necessary to ensure a high utilization rate of Automated Guided Vehicles (AGVs). Therefore, AGV driving batteries and battery charging have become a problem. With the development of high-power batteries, it is now possible to allow batteries to be charged quickly within seconds. This technology enables AGVs to complete charging without leaving the production line during production. The battery charging device can be installed anywhere in the entire production process system that allows AGV to stop (such as segmented transportation area, turning area, loading stop area, etc.). The signage should be integrated with the existing layout as much as possible.

The battery charging device consists of a brush plate and a brush block. The brush plate is installed on the ground or can be mounted on the side of the AGV track with a bracket, while the brush block is installed on the vehicle. The factory power supply provides power to the brush board. Once the AGV reaches the charging position and the brush block comes into contact with the brush board, it will charge the AGV. The sliding in/out slope on the brush board can help the brush block smoothly enter or exit. The brush installed on the brush block can sweep away the residue on the brush board, and the working voltage of the battery charging device is 12-80V. When the rated voltage is greater than 25VAC or 60VDC, a protective device must be installed to avoid accidental contact.

AGVs, as transport vehicles or mobile assembly platforms, connect various assembly areas on the assembly line. AGVs can also serve as transport vehicles for warehousing, internal logistics, or lifting equipment.

The various application fields of AGV not only require higher requirements for the vehicle itself, but also for its battery charging device.

Environmental conditions for use, general parameters for standard components

• Storage environment temperature: - 25 ℃ to+60 ℃.
• Working environment temperature: - 10 ℃ to+40 ℃.
• Atmospheric pressure: 86kPa to 106kPa.
• Relative humidity: 5% to 95%

The brush board and brush blocks are all made of imported UPE raw materials and T2 copper

UPE, also known as ultra-high molecular weight polyethylene, is an engineering plastic with good comprehensive performance. Its five properties of wear resistance, impact resistance, corrosion resistance, self-lubricating, and impact absorption ability are among the best in existing plastics.

• The wear resistance ranks among the top of plastics, which is 8 times that of ordinary carbon steel.
• Plastic ranks among the top in terms of impact strength.
• The self-lubricating performance is equivalent to polytetrafluoroethylene.
• Strong corrosion resistance and high chemical technology performance.
• Good non adhesiveness, the surface of the product is not easily attached to other materials.
• Sanitary and non-toxic, resistant to extremely low temperatures (minus 196 degrees Celsius)
• UPE has stable performance, good aging resistance and electrical insulation performance, high mechanical strength and long service life

T2 purple copper (copper silver alloy) has high purity, fine structure, and low oxygen content

• Excellent conductivity and good thermoelectric properties.
• Corrosion resistance and weather resistance.
• The surface of copper parts in the T series products is treated with anti-oxidation treatment

The entire series of products can be customized according to customer requirements or drawings!

Shanghai Xuji Electric Co., LtdcorrectElectrical testing equipment，Transformer detection equipment、High voltage testing equipment、Electricity metering equipment、Secondary circuit detection equipment，Integrated automation of power systemAnd intelligentInstrumentationThe technology enterpriseThe product is widely used in industries such as power systems, scientific research and teaching institutions, water conservancy, petroleum, railways, mining, and chemical engineering.

The company has a strong R&D team and a scientific management system. Adhering to the development philosophy of "forging excellence with professionalism, winning the market with integrity, emphasizing quality and science", we have cultivated and absorbed a large number of advanced electrical engineering technologies such as power electronics, high voltage, computer measurement and control, software technology, and electronic technologyTechnical talents, always providing users with convenient and fast service concepts for design, supply, debugging, and maintenance, offering high-quality and perfect products, and building a professional electrical boutique enterprise!