500 type pulse dust removal unit-Fornitore globale

No. 1545 Jiulong Cloud Entrepreneurship Incubation Park, No. 6-4 Jiulongyuan Avenue, Jiulongpo District, Chongqing

1、 Product Introduction
500The type of drug crushing unit is widely used in the crushing and processing of materials such as chemicals, dyes, Chinese and Western medicines, coatings, pesticides, food, and feed. It has strong adaptability to light, heavy, soft, hard, brittle, tough, sticky, and fibrous materials.
The unit includes several parts such as an electrical control cabinet, a main unit, a powder classifier, a cyclone separator, a dust removal filter, and an induced draft fan. The unit has a compact and reasonable structure, small size, low energy consumption, high efficiency, smooth transmission, no dust flying, good self cooling function, easy installation and maintenance, easy disassembly, easy repair, and convenient replacement of vulnerable parts.

two.Composition and Performance
1.Crushing host
The crusher adopts a centrifugal air selection type, which uses high-speed rotating hammer blades to shear, collide, and grind materials. It has a grading mechanism inside, and the fineness of the outlet material can be adjusted by adjusting the gap between the inclined fan blades and the inclined lining. The crushed material is sent to the powder collection and grading machine by the positive air system, and the main engine is connected by a coupling for smooth operation.
Technical parameters:

name call	number measure	one position
electricity machine work rate	22	KW
host axle change fast	2940	r/min
give birth to give birth to ability power	80～400	Kg/h
accomplish article fine linear measure	80～200	eye

2. Powder classifier
The powder classifier can classify the crushed materials, and the powder that reaches the fineness is sent to the cyclone separator for collection by wind power. The powder that does not reach the fineness is automatically sent back to the main machine for secondary crushing. Changing the classifier screen mesh can control the fineness of the finished powder, and there is an automatic brush cleaning mechanism inside the screen to prevent material from blocking the screen.
Technical parameters:

name call	number measure	one position
electricity machine work rate	1.5	KW
host axle change number	32	r/min
sieve net chi cun	Ø700×1200	㎜

3. Cyclone separator
When the dusty airflow enters the separator, it will change from linear motion to circular motion. The airflow flows in a spiral shape towards the cone along the wall of the separator, and centrifugal force is generated during the rotation process. Dust particles with a density greater than that of the gas are thrown towards the wall of the separator and discharged by the fan When the airflow decreases, the cone shrinks towards the center and is discharged through the exhaust pipe.
Technical parameters:

name call	number measure	one position
close wind machine work rate	0.37	kw
change fast	1440	r/min

4. Dust filter
This machine is a device that separates solid dust from gas containing micro powder by passing it through a special filtering material. The machine uses a special filter bag for filtration.
Technical parameters:

name call	number measure	one position
place texture wind measure	2800	m³/h
cross filter face amass	13	㎡
get rid of dust effect rate	99.9	%

5. Induced draft fan
Technical parameters:

name call		number measure	one position
electricity machine work rate		3	kw
change number		2900	r/min
wind measure	1558		m³/h
wind press	3384		Pa

6.
Electric control cabinet

The control center of the entire unit can control the normal operation of each process through buttons.