The 600X hydraulic electric control valve is small in size, light in weight, easy to maintain, convenient to use, and reliable. Electromagnetic valves can be selected from AC 220V or DC 24V, and can be either normally open or normally closed according to various occasions. A filter should be installed in front of the 600X hydraulic electric control valve, and it should meet the requirements of easy discharge. Electric hydraulic control valves are widely used in water supply network systems such as high-rise buildings, living areas, and urban water supply projects.

The 600X hydraulic electric control valve is a valve installed in pipelines for remote control of operation opening and closing. It can replace large electric devices used to open and close gate valves or butterfly valves. It is small in size, light in weight, easy to maintain, convenient to use, and reliable. The electric control valve is installed in the pipeline, and the opening and closing of the main valve is controlled by remotely controlling the solenoid valve on the guide pipe. By transmitting pressure, the main valve is adjusted according to the changes in the small-sized pilot valve.

Working principle of 600X hydraulic electric control valve:

When the valve supplies water from the front end, the water flows through the needle valve into the main valve control room. When the solenoid valve is opened, the water in the control room flows out through the solenoid valve and ball valve. The opening of the ball valve is greater than that of the needle valve, and the pressure in the control room of the main valve is very low. The main valve is in a fully open state. When the solenoid valve is closed, the water in the control room of the main valve cannot flow out. The control room increases the pressure and pushes the diaphragm to close the main valve.

The 600X hydraulic electric control valve consists of a main valve, an electromagnetic pilot valve, a needle valve, a ball valve, a micro filter, and a pressure gauge to form a hydraulic control connection system. It is a hydraulic operation with an electromagnetic valve as the pilot valve. The valve can be remotely controlled to open and close through the electromagnetic pilot valve. After installing additional devices, the speed of opening and closing can be controlled. Commonly used for automatic control in water supply, drainage, and industrial systems, the control response is accurate, and the pipeline system is remotely opened and closed based on electrical signals to achieve remote operation. And it can replace gate valves and butterfly valves for large-scale electric operating systems. Electric hydraulic control valves use pilot valves to control the opening and closing of valves, saving energy. Can replace other large electric devices for valves. The valve closing speed can be adjusted, and it closes smoothly without pressure fluctuations.