VIP member
660V 丨 1140V coal mine pipeline pump
Brand: Quanda Pump Valve Manufacturer Direct Sales Address: Oubei, Yongjia, Wenzhou, Zhejiang Model: ISGB Material: Cast Iron, Stainless Steel Power:
Product details
660V 丨 1140V coal mine pipeline pumpProduct Overview:
SGB vertical explosion-proofPipeline pumpOur scientific and technological personnel, in collaboration with domestic pump experts, have selected excellent hydraulic models and adopted the IS typecentrifugal pumpThe performance parameters are cleverly combined and designed based on the general vertical pump. At the same time, depending on the temperature and medium of useISG pipeline pumpOn the basis of this, suitable hot water, high temperature, and corrosive chemical pumps will be dispatchedoil pumpThis series of products has the advantages of high efficiency, energy saving, low noise, and reliable performance.
660V 丨 1140V coal mine pipeline pumpProduct features:
1. The pump is a vertical structure with the same inlet and outlet diameters and located on the same centerline. It can be installed in pipelines like a valve, with a compact and beautiful appearance, small footprint, and low construction investment. If a protective cover is added, it can be used outdoors.2. The impeller is directly installed on the extended shaft of the motor, with a short axial dimension and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, ensuring smooth operation, low vibration, and low noise of the pump.
3. The shaft seal adopts mechanical seal or a combination of mechanical seals, using imported titanium alloy sealing rings, medium-sized high-temperature resistant mechanical seals, and hard alloy materials for wear-resistant seals, which can effectively extend the service life of mechanical seals.
4. Easy installation and maintenance, no need to disassemble the pipeline system, just remove the pump coupling nut to extract all rotor components.
5. Pumps can be operated in series or parallel according to the requirements of flow rate and head.
6. Vertical and horizontal installation of pumps can be adopted according to the requirements of pipeline layout.
660V coal mine pipeline pumpWorking conditions:
1. The suction pressure is ≤ 1.0MPa, or the maximum working pressure of the pump system is ≤ 1.6MPa, that is, the pump suction inlet pressure+pump head is ≤ 1.6MPa. The static pressure test pressure of the pump is 2.5MPa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should be separately stated when ordering, so that the overcurrent and connection parts of the pump can be made of cast steel materials during manufacturing.
2. Environmental temperature<40 ℃, relative humidity<95%.
3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm.
Note: If the medium used is with small particles, please specify when ordering so that the manufacturer can use wear-resistant mechanical seals.
660V coal mine pipeline pumpMain purpose:
1.ISGB vertical explosion-proof pipeline pumpIt is used for transporting clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water circulation pressurization and equipment matching. The operating temperature is T ＜ 80 ℃.
2.IRG hot water pipeline pumpSuitable for pumps used in metallurgy, chemical industry, textile, wood processing, papermaking, as well as high-temperature hot water pressurized circulation transportation for boilers in hotels, bathrooms, and guesthouses, and for urban housing heating circulation. The operating temperature is below 120 ℃.
3.GRG vertical high-temperature pipeline pumpWidely used in energy, metallurgy, chemical industry, textile, papermaking, as well as high-temperature hot water pressurized circulation transportation for boilers in hotels, bathrooms, and guesthouses, and as a pump for urban housing heating circulation, with operating temperatures below 240 ℃.
4.IHG vertical pipeline chemical pumpIt is used for conveying liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. It is suitable for industries such as petroleum, chemical, metallurgical, power, papermaking, food and pharmaceuticals, and synthetic fibers. The operating temperature ranges from -20 ℃ to 120 ℃.
5.YG vertical pipeline oil pump，For transporting petroleum products such as gasoline, kerosene, diesel, etc., the temperature of the transported medium is -20 ℃~+120 ℃.
6.IHGB vertical stainless steel explosion-proof pipeline pumpSuitable for transporting flammable chemical liquids.
7.ISGD, IRGD, GRGD, IHGH, YGD, IHGBD vertical low-speed pipeline centrifugal pumpsSuitable for occasions with low environmental noise requirements and air conditioning circulation.
Please provide as much as possible for ordering:
1. Model 2. Diameter 3. Head (m) 4. Flow rate 5. Motor power (KW) 6. Speed (R/min) 7. Material without accessories 8. Voltage (V)
Welcome to visit our Quanda Pump Valve【www.quandabf.cn】If you have any questions You can call us and we will do our best to provide you with high-quality service.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-