TSIAEROTRAK ™ The 7510 remote particle counter provides versatility and flexibility. Using Ethernet (TCP/IP) or serial Modbus ® RTU communication is easily integrated. This instrument can be connected via Ethernet (Power over Ethernet) or powered by a local power source, simplifying installation. It can be configured using a local PC or via a web browser.

This particle counter can also store up to 3000 sample records and provide data redundancy functionality. This instrument can simultaneously report up to four particle size information and other key information, such as laser current, background light level, last calibration date, serial number, and production date, for easy warranty management.

When managing a large number of instruments, digital calibration achieves consistency. By utilizing optional temperature/relative humidity sensors, users can monitor automation systems or building automation systems without the need for additional sensor configuration, cable connections, and power supply. AEROTRAK remote particle counter also has built-in alarm output, allowing users to issue local alarms from the particle counter.

Application scope

Continuous particle pollution monitoring

Pharmaceutical cleanroom monitoring

medical equipment

hospital pharmacy

In vitro fertilization equipment

EU Organization and Cell Directive

EADS

Particle size range: 0.5-25 μm

Particle size resolution: Standard: 0.3, 5.0 μ m, optional: 0.3, 0.5, 1.0, 5.0 μ m (other channels are optional)

Counting efficiency: 0.5 μ m, 50% greater than 0.75 μ m, 100% (compliant with JIS)

Concentration limit: 100000/ft3, maximum loss of 5%

Laser source: laser diode

Zeroing:<1 per 5 minutes (<2 per cubic foot) in accordance with JIS B9921

Flow rate: 28.3 liters per minute

Verification: Traceable NIST TSI Verification System

Vacuum requirement: External vacuum>38.1cm Hg

Communication modes: Ethernet (TCP/IP protocol) and serial Modbus output

Data storage capacity: 3000 data records

Status indicators: battery level, service, sampling, and Ethernet

External alarm: Output normally open dry contact rated 0 to 60 V AC/DC 1 ampere

Environmental sensor: optional temperature and humidity probe 32 ° to 113 ° F (0 ° to 45 ° C) ± 2 ° F (1 ° C); 10 to 90% RH ± 5%

Surface Material: Stainless Steel

Power consumption: Ethernet power supply or 12VDC external power supply

Volume: (length x width x height) 11.5cmx4.1cmx7.2cm

Weight: 0.43 kilograms

Standard: CE，JIS B9921，ISO21501-4

Warranty: 2 years, optional extended warranty

Operating range: 10-40 ℃, 20% -95% non condensing

Storage range: -10-50 ℃, 98% non condensing

Includes accessories: CD-ROM Operating Manual