The 900LW multifunctional film sealing machine adopts electronic constant temperature control and stepless speed regulation transmission system, which has the functions of automatic continuous sealing, printing product labels, one-time completion, and can be used horizontally or vertically. Used for sealing and bag making of single-layer films and various composite films, widely used in food, pharmaceutical, seed, chemical, light industry and other sectors.

Product parameters:
Voltage: 220/50 (V/Hz)
Power: 500w
Sealing speed: 0-12 (m/min)
Sealing width: 8-10mm
Series Introduction
Sealing equipment mainly includes sealing machines, including simple sealing machines and fully automatic sealing machines. Sealing machine is a mechanical device that seals containers filled with packaging materials. After the product is loaded into the packaging container, the sealing machine equipment is required to seal the packaging container. The sealing machine refers to the mechanical device that seals the container after the product is contained in the packaging container. There are many materials used to make packaging containers, such as paper, plastic, glass, ceramics, metal, composite materials, etc., and the shape and physical properties of packaging containers are also different. Therefore, the sealing forms and sealing devices used are also different.
Process operation method
1. Press the "ON" button, the power indicator light and "COOLER" light will turn on, and the warning light will flash.
2. Press the "Start" button, the alarm light will turn off, the "START" indicator light will turn on, and the power will reach the predetermined setting.
3. Turn on the power supply of the conveyor belt, operate the conveyor belt, and adjust the speed knob to the appropriate position.
4. Push in the container to be sealed and start normal operation.
5. If overcurrent occurs during operation, the "FAULT" light on the control panel will light up and the warning light will flash. At this time, press the "RESET" button and wait for the overcurrent light to turn on
After extinguishing, press the "START" button again.
6. After the work is completed, press the "STOP" button to return the machine to state 1.
7. Press the "OFF" button to turn off the machine and exit standby mode.