VIP member
A8W ship type switch
Product category: Omron boat shaped switch Product description: boat shaped switch for high-capacity switches ▶ Unique switch structure, achieving a
Product details
| type |
| Contact form | 1-pole single throw (SPST) |
Minimum packaging unit | |||||
|---|---|---|---|---|---|---|---|
| Terminal shape | Welding terminals | Terminals for printed circuit boards | Printed circuit board right corner terminal | Left corner terminal of printed circuit board | Terminal 187 of terminal block # 187 | ||
| Color of edges and caps | black | black | black | black | black | ||
| unmarked | A8L-11-11N1 | A8L-11-12N1 | A8L-11-13N1 | A8L-11-14N1 | A8L-11-15N1 | 300 pieces | |
| Marked | A8L-11-11N2 | A8L-11-12N2 | A8L-11-13N2 | A8L-11-14N2 | A8L-11-15N2 | ||
| A8L-11-11N3 | A8L-11-12N3 | A8L-11-13N3 | A8L-11-14N3 | A8L-11-15N3 | |||
| A8L-11-11N6 | A8L-11-12N6 | A8L-11-13N6 | A8L-11-14N6 | A8L-11-15N6 | |||
| Contact form | 2-pole single throw (DPST) |
Minimum packaging unit | |||||
|---|---|---|---|---|---|---|---|
| Terminal shape | Welding terminals | Terminals for printed circuit boards | Printed circuit board right corner terminal | Left corner terminal of printed circuit board | Terminal 187 of terminal block # 187 | ||
| Color of edges and caps | black | black | black | black | black | ||
| unmarked | A8L-11-11N1 | A8L-11-12N1 | A8L-11-13N1 | A8L-11-14N1 | A8L-11-15N1 | 300 pieces | |
| Marked | A8L-11-11N2 | A8L-11-12N2 | A8L-11-13N2 | A8L-11-14N2 | A8L-11-15N2 | ||
| A8L-11-11N3 | A8L-11-12N3 | A8L-11-13N3 | A8L-11-14N3 | A8L-11-15N3 | |||
| A8L-11-11N6 | A8L-11-12N6 | A8L-11-13N6 | A8L-11-14N6 | A8L-11-15N6 | |||
| ■ Rated value |
| project | Non inductive load (A) | Inductive load (A) | ||
|---|---|---|---|---|
| rated voltage | Resistive load | Lamp load | Inductive | motor load |
| AC125 | 10 | 10 | 8 | 8 |
| AC250 | 10 | 10 | 8 | 8 |
| Note 1 | The lamp load is the load with 10 times the surge current. |
| Note 2 | The inductive load has a power factor of 0.4 or above (AC). |
| Note 3 | The load of the electric motor is the load with 6 times the surge current. |
| Note 4 | The rated value refers to the test conducted under the following conditions in accordance with JIS C4505 standard. |
| (1) Environmental temperature: 20 ± 2 ℃ (2) Environmental humidity: 65 ± 5% RH (3) Operating frequency: 7 times/minute |
| ■ Performance |
| Allowable operating speed | machinery | Below 20 times/min |
| electrical | Below 7 times per minute | |
| insulation resistance | 100M Ω or above (measured with a DC500V insulation resistance meter) | |
| Contact resistance (initial value) | 20MΩThe following (DC6~8V, 1A voltage drop method) | |
| withstanding voltage | Terminal - Between terminals | AC2,000V 50/60Hz 1min |
| Between terminals and ground | AC4,000V 50/60Hz 1min | |
| vibrate | malfunction | 10-55Hz dual amplitude 1.5mm |
| impact | malfunction | Maximum 1000m/s2 |
| lifetime | machinery | Over 50000 times |
| electrical | Over 10000 times | |
| Impulse current | Maximum 117A | |
| Protective structure | IEC IP67 on the panel | |
| Environmental temperature for use | Temperature -25~+55 ℃, humidity below 60% RH (no ice or condensation) | |
| Environmental humidity for use | Humidity 25-85% RH (+15-35 ℃) | |
| weight | 7.8g (Level 1) 9.3g (Level 2) | |
| Note For details on the performance of individual certification specifications, please inquire with the company. |
|
(Position: mm)
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
The 1-pole type only has 1-2 terminals. The terminals on the Omron logo side in the picture are 1-2 terminals. Please confirm before use. When using the right corner terminal, the outer terminals are 1-2 terminals. When using the left corner terminal, the inner terminals are 1-2 terminals. |
|||||||||||||||||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-