MS/MX/MF/MLRapid moisture analyzer

JapanA&DWe have developed a high-precision and rapid moisture analyzer with a brand new design concept and exquisite craftsmanship. It is easy to operate, easy to observe, and has been widely used in industries such as food, pharmaceuticals, petroleum, papermaking, feed, chemical industry, coatings, minerals, environmental protection, and geology for rapid determination of material moisture content. At the same time, it meets the requirements for determining solid, particle, powder, gel, and liquid moisture content

characteristic:
●Having innovationSRARapid and uniform halogen lamp heater technology
Adopting straight tube halogen lamps and a unique designSRA(Secondary radiation auxiliary device) Radiators are used to shorten measurement time and form a fast and uniform heater.

●High * * * degree
useSHSThe fast and sensitive weighing sensor enables very few samples to obtain very accurate moisture content determination under high-precision weighing.
●Using sodium tartrate dihydrate as the standard for checking the accuracy of moisture content measurement
Sodium tartrate dihydrate is a substance with a stable water content15.66%+0.3/-0.1Chemical substances,Therefore, it is reliable to conduct a degree check and provide the measuring instrument as a reference value.
●Heater temperature calibration (only applicable)MS/MX）
Optional temperature calibrator, calibration results can beGLP、GMP、ISOFormat output.
●standardWinCT-MoistureSoftware (only)MS/MX）Realize real-time graphic display
WinCT-MoistureThe software is a moisture content analysis software designed specifically for graphic display, which can display the graph of moisture content changes during measurement, and can use this graph to analyze the moisture content,Set up measurement programs for different samples through computer-aided analysis.
●Measurement program,Measurement result storage function
***Multi energy storage20Group measurement program, calling different measurement programs according to different samples at any time for moisture content determination,Therefore, it can achieve fast measurement and avoid setting operation errors（MF***Multiple storage10group, ML***Multiple storage5Group). Measurement results can be stored100Group（MFdo50group, MLdo30Group) and output through computer or printer.Completely avoiding human error.
●conform toGLP/GMP/GCPandISOStandard, with date/Time,IDCalibration data and detection record output
Capable of recording and outputting calibration and measurement data to meet quality management and certification requirements.
●standardRS-232interface
givePCBidirectional communication or connection to a printer.
●Clear and easy to observe large screen fluorescent display
The measurement program, set value, moisture content change rate, measurement status, data number, and other important information are displayed clearly at a glance.
●Easy to operate components
The disc handle is designed in accordance with * * * engineering to avoid accidents such as * * * when hot samples are placed or removed. The wing shaped handle makes it easy to open and close the heating cover.
●Guarantee of low maintenance costs
Users do not need to stop using halogen lamps when replacing them, and the protected chamber is easy to clean (the lifespan of halogen lamps is about5000Hour)
●Five measurement programs
Standard mode: Measurement is automatically completed by setting high, medium, and low measurement degrees.
Automatic mode: When the moisture content change rate is less than a set ratio, the measurement will automatically end.
quick mode:In order to achieve rapid measurement, before startup3Minute adoption200℃Heat up and then complete the measurement according to the automatic settings.
Timer mode: Measurement is completed by setting the duration.
Manual mode: operate the measurement process by pressing the start and stop keys.
●Four drying procedures
Standard drying:Heat up directly to the set temperature after startup.
Asymptotic drying:Gradually raise the temperature to the set temperature after a preset time.
Step wise drying:Adopt different temperatures in stages according to time.
Rapid drying:use200℃rapid heating3After minutes, continue heating according to the set drying temperature.
Any combination of measurement and drying programs can fully meet the measurement requirements of different samples.

Standard accessories
●Sample tray（MS/MX/MFhave20One,MLhave10A)
●Disk handle（MS/MX/MFhave2One,MLhave1A)
●Tweezers, sample spoon, and inspection sample (sodium tartrate dihydrate)30g）(Only)MS/MX/MF）
●CD-ROM（MS/MXdoWinCT-Moisture，MFdoWinCT）
●MS/MXjoin in marriageRS-232Line,
●Display film
●Dust film (only)MS/MX/MF)
●User Manual
●Quick access card
●power line
●***Two silk threads

Optional accessories:
●AX-MX-31sample tray(100individual)
●AX-MX-32-1glass fiber sheet(100a flat)
●AX-MX-32-2glass fiber sheet(100a flat)
●AX-MX-33Test sample(Sodium tartrate dihydrate30can12piece)
●AX-MX-34Halogen Tube
●AX-MX-40 RS-232cable
●AX-MX-41Calibration weights(20g, OIML)
●AX-MX-43TEMPERATURE CALIBRATOR(onlyMS/MXapply)