The AP-5000 has increased the number of sensors and can monitor up to 14 parameters simultaneously.

The AP-5000 standard package includes a water quality monitor, a 3-meter cable, a GPS handheld device, a range of accessories, and calibration fluid, all packaged in a sturdy suitcase for easy storage and transportation.

Metal material:

All probes are made of marine grade aluminum alloy, with a black surface and anodized treatment, which has good corrosion resistance and resistance to biological pollution.

Sensor:

The AP-5000 is equipped with commonly used water quality monitoring sensors pre installed on the probe, which can monitor 10 standard parameters: PH、ORP、 Conductivity TDS、SSG、 Electrical resistivity, salinity, dissolved oxygen, depth, temperature. At the same time, the host also comes with 4 empty Aux sockets, which can be customized to your device by adding additional sensors. Each socket can accommodate ion sensors (ISE) or optical sensors, so the AP-5000 can monitor up to 14 parameters.

Optical dissolved oxygen sensor：

The AP-5000 has an optical DO sensor that has been installed and calibrated in the factory. Compared to previous thermocouple DO sensors, this sensor requires no more maintenance and can provide more stable readings, requiring only the valve cover to be replaced every 2-3 years. The above picture shows the flash of the optical DO sensor LED during the measurement process.

Extension cable:

There is one in the standard package3-meter cable. If the actual measurement depth is large and additional length is required, it can also be extended. We have lengths of 10 meters, 20 meters, and 30 meters to choose from. Custom length can also be provided upon request. All cables of 20 meters and above are installed on reels for easier operation.

AP-5000 Flowcell ：

A sampling monitoring system can be constructed, equipped with a sampling pool and adapter accessories. The adapter is installed at the connection seam between the probe sleeve and the host, serving to fix and seal the device. The equipment is placed in the sampling pool to ensure that the sampling flow rate isAbout 30 liters per hour. The adapter avoids contact between air and the extracted sample, thereby obtaining truly representative measurement results.