ASTM D2854 standard test for apparent density of activated carbon; Vibration test apparent density; Activated carbon apparent density tester; Apparent density of granular activated carbon; Vibration apparent density tester FT-105F activated carbon apparent density tester. It is made according to the standard ASTM D2854 activated carbon apparent density standard test method and is suitable for determining the surface density of particles. It is required that at least 90% of the particles are larger than 80 mesh; 2、 This law applies to pressed activated carbon with a particle length to diameter ratio greater than 115 3、 Overview: To determine the apparent density (bulk density), granular activated carbon is allowed to fall freely from a vibrating feeder into a 100ml graduated cylinder. The volume filled is measured and the weight of the activated carbon in that volume is weighed. 4、 Technical parameter requirements: 1. Carbon storage funnel, made of stainless steel material: the upper diameter of the funnel is 76.2mm; Height 120.7mm; Export inner diameter 41.3mm; 2. Carbon supply funnel: made of stainless steel material; The diameter of the funnel is 88.9mm; Height 101.6mm; The inner diameter of the outlet is 23.8mm 3. Vibration table, adjustable vibration frequency (speed); 4. 100ml graduated measuring cylinder with scale; 5. Support one set of scaffolding; 6. Input: Power supply 220V (1 ± 10%)/50Hz (1 ± 5%) 7. Attachments: Brush, steel ruler, instruction manual, warranty card, certificate of conformity 8. (Optional) Balance: 1000g Accuracy: 0.1g ROOKO/Ruike brand, from Ruike Instrument Company, is a company dedicated to changing people's lifestyles and quality Emphasize both delicacy and refinement; The Origin of Wisdom