ATMOS 22 2D Ultrasonic Anemometer (formerly DS-2)-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

22F, Block A, Chengming Building, No. 2 Xizhimen South Street, Xicheng District, Beijing

Contact Now

ATMOS 22 2D Ultrasonic Anemometer (formerly DS-2)

Contact Supplier

More Products

Product details

ATMOS 22二维超声风速仪

ATMOS 22 is a durable research grade two-dimensional ultrasonic anemometer. Suitable for research in agriculture, forestry, and environmental science. The low starting wind speed (0 m/s) and fine resolution (0.01 m/s) make it more suitable for measuring weak wind environments, such as inside the canopy.

main features

Start wind speed as low as 0 m/s
No rotating components, no need for refueling or bearing replacement, no mechanical wear and tear
Low power consumption, operating current less than 100 uA
Detecting needle like protrusions on the flat surface in space, weakening raindropsThe impact on ultrasound signals

Access ZL6 data acquisition and download data through the Internet
Compact appearance, 10cm (diameter) x 16cm (height)
Easy installation, headphone jack
SDI-12 Digital Transmission

Technical Parameter

	range	resolution	accuracy
horizontal wind speed	0 ~ 30 m/s	0.01 m/s	0.3 m/s or<3%
gust	0 ~ 30 m/s	0.01 m/s	0.3 m/s or<3%
wind direction	0 ~ 359°	1°	±5°
incline	-90 ~ 90°	0.1°	±1°
output	SDI-12 Communication
size	10 cm (diameter) x 16 cm (height)
Cable length	Standard 5 meters (other lengths can be customized, up to a maximum of 75 meters)
interface type	3.5mm stereo interface or tinned bare wire
Support data collection (purchased separately)	METER ZL6, EM50 series, EM60 series data acquisition, or data acquisition that can provide 3.6-15.0VDC excitation voltage and support SDI-12 communication
Power supply voltage (VCC) to GND	Minimum 3.6 VDC; Maximum 15.0 VDC
Digital input voltage (logic high)	Minimum 2.8; Maximum 15.0 V; Typical 3.6 V
Digital input voltage (logic low)	Minimum -0.3 V; Typical 0.0 V; Maximum 0.8 V
Digital output voltage (logic high)	Typical 3.6V
Power line conversion rate	Minimum 1.0 V/ms
Current consumption (during measurement)	Minimum 0.2 mA; Typical 8.0 mA; Maximum 33.0 mA
Current consumption (during testing period)	Minimum 0.2 mA; Typical 0.3 mA; Maximum 0.4 mA
operation temperature	-50 ~ 60 ℃
Start time (SDI Ready)	aRx! Command, typically 10 seconds; Other commands, typically 130 ms
Start time (SDI-12, DDI disabled)	Typical: 200ms
Time	Typical 110 ms; Maximum 3000 ms
Following standards	Produced under ISO 9001:2015 standard EM ISO/IEC 17050:2010 (CE marking)

Origin and Manufacturer:AmericaMETERCompany_{(Former Decagon)}

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content