ATX224RShimadzu One in Ten Thousand Analytical Balance

Product Introduction of Shimadzu ATX224R in Japan:

The new AT-R series from Shimadzu is equipped with the quality sensor Uni Bloc. Its uniform structure greatly improves the "responsiveness" and "temperature characteristics" of the AT-R series, while its simplicity and miniaturization enhance its "impact resistance". Even with long-term use, reliable weighing can be achieved. In addition, the newly added functions of the AT-R series greatly improve the convenience of weighing for users.

1. Can intelligently set responsiveness and stability

Responsiveness is more important when weighing samples such as powders and liquids. On the contrary, stability is more important when weighing in environments with wind and vibration. The AT-R series is equipped with 5 levels of calibration, which can be easily switched between two modes of emphasizing responsiveness (R) and emphasizing stability (S) during detection.

2. Can be connected to PC via USB and RS232C

The standard configuration includes two interfaces, USB and RS232C, which can be easily connected to PCs and PLCs (programmable logic controllers). Directly transmit the measured value to the PC to prevent human error.

3. Static eliminators can be used for stable weighing

The optional static eliminator STABLO-AP can quickly remove static electricity from samples and containers under windless conditions. It can prevent a decrease in reproducibility and numerical deviation caused by static electricity. The use of intelligent brackets (optional accessories) can further improve the static elimination effect of flasks and other equipment.

ATX224RShimadzu One in Ten Thousand Analytical Balance

Technical parameters of Shimadzu ATX224R in Japan:

Range: 220g

Accuracy: 0.1mg

Weighing tray size: approximately ø 91mm

Host size: approximately 213 (W) x 356 (D) x 338 (H) mm

Host weight: approximately 6.2kg

Required power supply: AC adapter (input AC100V 50/60Hz output DC 12V, 1A)

Output/input ports: RS232C (D-sub 9P socket) USBDevice （Type B）

Calibration weight: Built in weight