Access control card swiping controls the air shower room, which is used to manage strict workshop settings. This system can manage the entry and attendance of workshop personnel; It can be set separately in the form of "fingerprint attendance" and "card swiping entry". The induction controlled air shower room can be applied to the external doors of highly confidential air shower rooms, and personnel need to confirm their identity by swiping a card before entering. Workers do not need to swipe their cards when leaving the workshop, they can unlock by simply pressing the one-way bounce switch.

This access control system uses ID cards and IC cards, which can be used interchangeably with the existing access cards of the customer company, and can increase the number of access cards. It can also magnetize or revoke permissions for new cards. The access control system adopts an integrated control electrical system. If you forget or lose your magnetic card, you can use the reset function. The specific operation is to remove the back cover of the door prohibition system, which has a "reset" button inside. Use a screwdriver or other sharp object to hold it for 2-3 seconds, and repeat it as the initial (please refer to the manual for specific initial instructions).

The role of air shower in the food production industry In modern food production processes. The cleanliness requirements for the production environment are relatively high. Due to the humid production environment of food products, corresponding disinfectants are selected to kill the air in the environment and those attached to the human body, equipment, containers, and buildings. In addition to ozone generator elimination equipment, processingQSCertification also requires purification equipment such as air shower rooms. Currently, many food processing plants have installed clean rooms. The more people pay attention to diet, the more they value the quality of ordinary food and increase the consumption of fresh food. In order to prevent microbial contamination throughout the entire food production process, it is necessary to treat raw materials, water, equipment, etc. The cleanliness of the production workshop environment is also an important condition. The food precision processing industry has high requirements for air cleanliness. In addition to ozone generator sterilization equipment, purification equipment such as air shower rooms are also needed for processing. Due to the relatively humid production environment of food processing, a stainless steel air shower is required. Food produced in clean rooms, due to their high cleanliness, can prevent harmful substances from adhering to the food, but cannot eliminate the harmful substances originally brought by the food. Therefore, sterilization methods such as heating, spraying, and irradiation are also required. Many food cleanrooms are mainly used for cooling and cutting off after sterilization(a flat)Packaging and other processes.The air shower room is a personal purification device used by operators when entering a clean room. It uses clean airflow to blow away dirt from people entering the room. Its nozzle can be adjusted to remove dust from people's bodies and prevent external pollution from entering the clean area. It can also be used for blowing and showering large cargo. Air shower room is a clean equipment for clean kitchens and prefabricated clean rooms,Used to blow away dust from the surfaces of human bodies and carrying items entering the purification plant,At the same time, the air shower also serves as an air brake buffer,Unprocessed air cannot enter the clean area,It is a device used for purifying the human body and preventing external air pollution in clean areas. Operation and Management of Air Shower Room Application Learning 1.The entrance and exit doors cannot be opened simultaneously 2.When the air is blowing out without stopping, avoid opening the door on the side of the dust shower room 3.When entering the clean room, follow the capacity regulations of the air shower room to enter4.In the air shower room, one must stand at the designated position 5.When taking an air bath, it is necessary to rotate the body and pat the clean clothes to facilitate the blowing of dust 6.When taking an air bath, both feet should step on the foot pedal pads multiple times to remove dust and foreign objects from the soles of the shoes 7.When taking an air bath, clean clothes should not come into contact with walls or floors 8.Do not touch the air outlet(The factory must regularly confirm and record whether the position of the air outlet is correct) 9.Replacement frequency of return air filter screen1season/order