Accessories for constant temperature and humidity test chambertechnical parameter

model

DB-TH-S-80G.Z.D

inside dimensions

W×H×D ：400×500×400(mm)

Carton size

W×H×D ：900×1450×1000(mm)

temperature range

G: -20℃— 100℃（150℃） Z: -40℃— 100℃（150℃） D: -70℃— 100℃（150℃）

Humidity range

20% RH —98% RH

Control stability

Temperature ± 0.5 ℃, humidity ± 2.0%

Uniformity of distribution

Temperature ± 2.0 ℃ Humidity ± 3.0%

heating rate

3 ℃/min (approximately 25 minutes from -40 ℃ to 30 ℃) nonlinear no-load

cooling rate

1 ℃/min (reduced from 30 ℃ to -40 ℃ for about 70 minutes) Nonlinear no-load

Temperature Limit

Zui high temperature 150 ℃ Zui low temperature -70 ℃

product mix

Inner box material

SUS # 304 stainless steel plate

Outer box material

SUS # 304 stainless steel plate

Insulation material

Hard Polyurethane foam+glass wool

packing

Silicone foam tightening 1 strip

Storage rack

There are 2 height adjustable stainless steel shelves inside the box (material: SUS # 304 stainless steel)

heater

Stainless steel fin type heat sink U-shaped heating tube imported from Taiwan, China

humidifier

Design of Split Type Humidifier Cylinder

Wind turbine

1 motor/stainless steel extended shaft/multi wing fan blade aluminum alloy wind wheel (SIROCCO FAN)/special adjustable hundred page air supply circulation system

Box door

Single door, double-layer door, embedded non reactive flat handle/four layer vacuum tempered glass enlarged window/electric automatic defogging, imported "PHILIP" lighting tube

Humidity system

One 15L stainless steel water tank is hidden inside/One automatic water supply pump (automatically supplying water from the lower water tank to the upper water tank)/Water recovery device/Water shortage alarm device