VIP member
Product details
Aerosol Collector HTY-ACB03
Performance characteristics
1. Closed sampling to avoid leakage and external contamination;
2. Easy to operate, convenient and effortless to press;
3. The sampling needle component is detachable and can withstand moist heat sterilization;
4. The card slot is adjustable and suitable for aerosol containers of different specifications;
5. Made of 316L stainless steel material, easy to clean and disinfect.
technical parameter
1. Material: 316L stainless steel
2. Size: 19 * 23 * 31cm (width, depth, height)
3. Compression rod length: 27cm
4. Weight: 5kg
5. Supporting consumables: KYLQ series bacterial culture incubator, FC752A-02 membrane filter
Regulatory requirements
2020General rules of the annual edition of the Chinese Pharmacopoeia1101Aseptic testing method
Take the specified amount of sterile aerosol test sample and transfer it to a closed membrane filter using specialized equipment. Or freeze each container at -20 ℃ or other suitable temperature for about 1 hour, remove it, quickly disinfect the opening part or valve of the test sample, place the container upright, and use sterile steel cones or needle sampling equipment to quickly drill a small hole in a suitable position that matches the structure of the container valve through aseptic operation
General Rule 1105 of the 2020 edition of the Chinese Pharmacopoeia for Microbial Limit Testing of Non Sterile Products: Microbial Counting Method for Aerosol Test Samples. Take the test sample, freeze it at -20 ℃ or other suitable temperature for about 1 hour, remove it, and quickly disinfect the opening part or valve of the test sample. Place the container upright and drill a small hole in a suitable position that matches the valve structure using a sterile steel cone or needle sampling device
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-