1、 Principle:

When the air accumulated at the bottom of the mixer is instantly sprayed, the powder particles inside the can become boiling and begin to stir and mix thoroughly. The air sprayed in is discharged through the air filter above. By spraying for a short period of time and consuming very little compressed air, it is possible to fully mix and efficiently homogenize. By combining raw material transportation and introducing touch screen and PLC control, it is easy to set up an automatic raw material processing production line.

2、 Characteristics:

1. Fast mixing with large capacity

It only takes a few minutes to mix a batch of materials evenly, and the mixing can range from a few tons to tens of tons at a time, while also saving on mixing operating costs.

2. No blind spots design

No concave circular holes, residual corners, etc., suitable for high-end, pharmaceutical, food, etc.

3. There are no mechanical rotating parts inside the mixer

There is no frictional heat generation, and there is no situation of lubricant contamination of the product. Because there is no agitation, it can be mixed without damage, such as chicken essence, compound fertilizer particles, etc. Especially suitable for mixing micro powders, it will not get stuck in rotating machinery such as bearings, and has a long trouble free time.

4. Closed mixing, dust-free and environmentally friendly

5. Easy to use, customizable, and automatically running.

6. Convenient feeding and discharging.

3、 Technical parameters:

Compressed air operating pressure (Mpa) 0.8

Mixing time (minr) 15

Loading factor 0.6~0.8

Working temperature (℃) Normal pressure

Working pressure inside the cylinder (Mpa) Micro negative pressure

4、 Application scenarios:

This equipment is mainly used in industries such as chemical products, plastics, pharmaceuticals, electronic substrates, food, feed, cement, soil and stone, ceramic raw materials, etc., where there are requirements for uniformity, rapid and large capacity mixing.

1. Airflow non-destructive particle and powder automatic operation mixing equipment

2. No dead corners, no leaks, sealed mixed environmentally friendly type

3. No passive pollution, no large mechanical component maintenance cost savings

4. Rapid mixer (mixing only takes a few minutes)

5. Large capacity mixer, homogenization bin (several tens of tons or even larger at a time, homogenization mixing equipment)