Aluminum Blacking Fiber Laser Marking Machine-Fornitore globale

Tianxiong Laser, 1st Floor, Poly Industrial Park, No. 10 Huiyuan Road, Wangniudun Town, Dongguan City

Introduction to Aluminum Blacking Fiber Laser Marking Machine Models

Aluminum Blacking Fiber Laser Marking Machine, also known as MOPA Fiber Laser Marking Machine, is a series of models specifically designed for achieving the best black effect on alumina and color effect on stainless steel. The main types of aluminum blacking fiber laser marking machines include M1 series, M6 series, and M7 series. The M7 series is the latest model with simpler adjustment, but it is slightly more expensive.

Characteristics of Aluminum Blacking Fiber Laser Marking Machine Models

The aluminum black fiber laser marking machine has a high electro-optical conversion rate, using a third-generation solid-state fiber laser with an electro-optical conversion efficiency of up to 60%. It has excellent beam quality M2<1.4, good beam quality, and a focused spot diameter of 10um. The divergence angle is 1/4 of that of semiconductor pump lasers, which is particularly suitable for precision and fine marking machine panels with large sizes. Laser engraving for larger products is also not a problem. The machine is made of double-layer thickened 1.5 sheet metal, which greatly improves its load-bearing capacity. Long term use of heavy objects will not cause deformation of the machine. The aluminum black fiber laser marking machine also uses the unique guiding characteristics of optical fibers to transmit the LD light source to the laser isolator through fiber transmission. After beam amplification, the output laser beam quality is more than 4 times better than that of old-fashioned semiconductor lasers.

Structural analysis of aluminum blackening fiber laser marking machine model

Aluminum Blacking Fiber Laser Marking Machine Parameter Table

average output power	20W-M1	30W-M1	20W-M6	30W-M6	20W-M7
wavelength	1064nm
Pulse width/Q frequency	Pulse width adjustable from 1ns-400ns/1KHz-2000KHz
Full power frequency range	1K-1000KHz	1K-1000KHz	1KHz-2000KHz	1KHz-2000KHz	1KHz-2000KHz
Marking format	110 × 110mm optional (70x70mm 150x150mm 200x200mm 300x300mm)
repeatability	＜30μrad
Carving line speed	≤7000mm/s
Minimum line width	0.01mm	0.01mm	0.03mm	0.03mm	0.03mm
Minimum character height	0.2mm		0.04mm
Cooling method	forced air cooling
Overall dimensions (L * W * H)	800mm×680mm×1200mm
power supply	AC 220V 50KHz
upgradeable	Electric lifting manual two-dimensional worktable, electric two-dimensional table rotating fixture, red light focusing

Application scope of aluminum blackening fiber laser marking machine

Aluminum black fiber laser marking machine is mainly used for black effect on alumina and color effect on stainless steel. Like ordinary fiber machines, it is mainly used for laser marking of circular objects. Like ordinary fiber laser marking machines, it is increasingly widely used in daily life. It is widely used in various fields such as ordinary metals and alloys (iron, copper, aluminum, magnesium, zinc, etc.), rare metals and alloys (gold, silver, titanium), metal oxides (all kinds of metal oxides are acceptable), special surface treatments (phosphating, aluminum anodizing, electroplating surface), ABS plastic (electrical appliance shells, daily necessities), ink (transparent buttons, printed products), epoxy resin (electronic component packaging, insulation layer), etc. Marking with text.

After sales service for aluminum blackening fiber laser marking machine

Delivery list of aluminum blackening fiber laser marking machine: delivery note, metal adjustment plate, tool set, training service list;
After sales and service of aluminum blackening fiber laser marking machine: home delivery, technical engineer on-site installation, debugging and training, lifelong technical support, lifelong software free upgrade, 2-hour response after sales, on-site processing within 24 hours, after-sales phone: 400-829-662