Detailed information on static pressure level gauge:

The static pressure level gauge is produced using original components of the German SENSE pressure sensor and is mainly used for liquid level measurement in urban water supply and drainage, water treatment plants, reservoirs, rivers, oceans, oil storage tanks, as well as petroleum, chemical, power and other departments. The measured medium can be water, oil, acidic, alkaline and viscous liquids. The instrument outputs a two-wire 4-20mADC standard current signal, which has the advantages of advanced technology, high accuracy, stable and reliable quality, and easy installation and use. It is an ideal liquid level instrument in process detection and control systems.

Static pressure level gauge is based on the principle that the measured liquid static pressure is proportional to the height of the liquid, and uses the piezoresistive effect of diffused silicon or ceramic sensitive elements to convert static pressure into electrical signals. After temperature compensation and linear correction. Convert to 4-20mADC standard current signal output. The sensor part of the static pressure level gauge can be directly inserted into the liquid, and the transmitter part can be fixed with flanges or brackets, making installation and use extremely convenient.

putting-into-type liquid level meter

Main technical indicators:

Accuracy: 0.5% FS (on-site header indication accuracy of 2.5% FS)

Measurement range: 0-2, 5, 10, 20, 50, 170m

Power supply: 24VDC

Output current 4-20mADC (two-wire system)

Load resistance: 0-620 Ω

Liquid level overload: 2 times

Operating temperature: - 25～＋70℃

Storage temperature: - 40～＋125℃

Tested medium: Liquid that can coexist with 316 and 1Cr18Ni9Ti stainless steel and rubber

Threaded interface: M14*1.5、 15mm in length

Dimensions: Diameter of Ø 28mm, Length of 170mm