Automatic Potentiometric Titimeter - Fully Automatic Sample Processor CHA-600

Automatic Potentiometric Titimeter - Fully Automatic Sample Processor CHA-600 Main Features:

1. The automatic sample processor is suitable for the AT-710 series and AT-510 automatic potentiometric titrators.
2. The sample processor can continuously measure 12 or 18 samples.
3. The automatic processor can be programmed by the potentiometric titrator to continuously measure samples.
4. The automatic sample processor can be set by the operator to a suitable cleaning sequence.
5. The processor can pre inject solvent and discharge waste liquid after measurement.
6. An exhaust device can be selected to protect the operator and avoid contact with hazardous solvents such as acetic acid or pyridine.
7. The automatic sample processor can choose a constant temperature bath to perform low-temperature or constant temperature measurements.

Automatic Potentiometric Titimeter - Fully Automatic Sample Processor CHA-600 Technical Parameters:

Cleaning method: Standard: Rinse (optional: wash with two solutions or solvents).
Cleaning solution: pure water, ethanol, acetic acid or other.
Environmental conditions: temperature: 5-35 ° C, humidity: below 85% RH.
Power supply: 100~120/200~240 AC, 50/60HZ, approximately 50W.
Size and weight: 520 (W) × 426 (D) × 369 (H) mm, approximately 17 kg.
Sample cup: CHA-600-12: 200mL beaker (PP), CHA-600-18: 100mL beaker (PP).

CHA-600-12: 12 sample cups.
CHA-600-18: 18 sample cups.