Product Usage：

BXJ-500Portable metallographic microscopeA microscope suitable for metallographic examination and failure analysis of various large workpieces on site. It does not require cutting and sampling, but directly grinds and polishes the workpiece to ensure its integrity. The microscope base is equipped with a magnetic suction seat, which is directly attached to the workpiece for on-site metallographic examination of the microstructure. Suitable for industries such as aviation manufacturing, machinery manufacturing, vehicle manufacturing, boiler and pressure vessel manufacturing and inspection, petrochemicals, railways, shipbuilding, power plants, power stations, equipment installation, large molds, quality supervision, physical and chemical laboratories, etc

.

Instrument features:
▲ Fully equipped, integrating on-site sample preparation, microscopic observation, and microscopic digital photography, easy to use and fast
▲ The microscope adopts a large field eyepiece and a long distance flat field achromatic objective lens, with a coarse and fine adjustment mechanism, stable focus, and clear imaging▲ Comes with coaxial lighting source, high powerLED40Lighting, rechargeable dimming, capable of continuous operation
hour▲ Microscope base configurationVType groove, with an adsorption force not less than15kg

It can adsorb various tested substances such as pipelines, containers, boilers, etc

Equipped with a microscope lens and camera connected to a metallographic microscope, it can directly take photos on site

Technical Specifications:

Optical system: Limited chromatic aberration correction optical system

Observation tube: monocular observation tubeBroad VisionEyepiece:WF10X(Φ

18mm)Long distance flat field achromatic objective lens:10XThe

40X100Optical total magnification:-400×

×Magnetic base:XYMobile base,suction25N/cm

And equipped with a magnetic switchLighting power supply:6V3W LED

Lamp illumination, rechargeable lithium battery500Camera device: Sony chip