The automatic filling and sealing machine for stick ice (CJ-2) has a small volume and light weight, and is made of stainless steel. This machine can produce various beverages such as stick ice, milk sticks, fruit milk, and fruit cold drinks.
Product parameters:
Voltage: 220/50 (V/Hz)
Power: 0.75KW
Sealing speed: 2000 cups/hour
Filling capacity 0-150ml
Specification: 960 * 430 * 330mm
Series Introduction
Sealing equipment mainly includes sealing machines, including simple sealing machines and fully automatic sealing machines. Sealing machine is a mechanical device that seals containers filled with packaging materials, and loads the products into the packaging
After the container is sealed, a sealing machine is required to seal the packaging container. A sealing machine refers to a mechanical device that seals the container after it contains the product. Create packaging containers
There are many materials used, such as paper, plastic, glass, ceramics, metal, composite materials, etc., and the shape and physical properties of packaging containers are also different. Therefore, the sealing used is
The mouth form and sealing device are also different.
Process operation method
1. Press the "ON" button, the power indicator light and "COOLER" light will turn on, and the warning light will flash.
2. Press the "Start" button, the alarm light will turn off, the "START" indicator light will turn on, and the power will reach the predetermined setting.
3. Turn on the power supply of the conveyor belt, operate the conveyor belt, and adjust the speed knob to the appropriate position.
4. Push in the container to be sealed and start normal operation.
5. If overcurrent occurs during operation, the "FAULT" light on the control panel will light up and the warning light will flash. At this time, press the "RESET" button and wait for the overcurrent light to turn on
After extinguishing, press the "START" button again.
6. After the work is completed, press the "STOP" button to return the machine to state 1.
7. Press the "OFF" button to turn off the machine and exit standby mode.