【product name】
BeijingLaboratory waste gas treatment equipment, BeijingLaboratory exhaust gas purification equipment
【PRODUCT MODEL】
WGL-3 type
【Product Introduction】
WGL-3 dry typeLaboratory waste gas treatment equipment, is a dry type developed after the alkaline neutralization method and activated carbon adsorption methodLaboratory waste gas treatmentThe device is not limited by the usage environment and can be placed indoors or outdoors, on the ground or on the roof. It does not cause secondary pollution and has been proven to have a purification efficiency of over 95% in practical use.

【product description】

1、 Preface

Laboratory waste gas treatment equipmentThat isLaboratory exhaust gas purification equipment, is a waste gas purifier used for laboratory waste gas emission standards. After years of experience in waste gas treatment, the company has discovered the WGL-3 dry type produced by our companyLaboratory waste gas treatmentThe equipment is particularly suitable for the characteristics of the laboratory industry, such as relatively low concentration of exhaust gas, intermittent emission of exhaust gas, and high requirements for noise. In addition, our laboratory's exhaust gas purification equipment alsoHigh purification efficiency, easy operation, and simple managementLow energy consumption, low noise, and good economy,Due to its long service life and other characteristics, many laboratory units have used this equipment for more than 10 years. The equipment is still in normal use today, and practice has proven that the exhaust gas emissions meet or exceed the current environmental protection standards (comprehensive emission standards for atmospheric pollutants)

GB19297-1996）。

2、 Equipment IntroductionWGL-3 dry typeLaboratory waste gas treatment equipment

It is a dry laboratory waste gas treatment equipment developed after the alkaline neutralization method and activated carbon adsorption method. This equipment is not limited by the usage environment and can be placed indoors or outdoors, on the ground or on the roof. It has no secondary pollution and has been proven to have a purification efficiency of over 95% in practical use.

3、 Structure and Purification Principle

The equipment is a box structure, and the exhaust gas generally enters the equipment body from the equipment inlet. Then, it passes through the adsorbent filling layer and undergoes a series of complex chemical reactions with the adsorbent to purify the exhaust gas. Finally, the exhaust gas purification equipment is discharged from the outlet. The equipment is mainly filled with SDG adsorbent as a filler, which is a scientific research product of Beijing Institute of Technology. Our company is a cooperative production unit with more than 15 years of experience in use. Any waste gas treatment equipment designed and used by our company meets environmental standards in the user unit. Representative units include CNOOC Chemical Design and Research Institute, Beijing Aerospace Materials Research Institute, and China Environmental Protection Ministry Standard Gas Research Institute.

4、 Technical specifications9This product is divided intoTechnical specifications,Single deviceThe processing air volume is62500-0000m3/h.The devices can be combined in parallel or series for use,

Our factory can supply non-standard products according to user requirements.

5、 Technical advantages