Germanybrabender TSE 20/40DDouble screw extruder and driving device for food extrusion experiments

The food extrusion testing experiment is necessary to improve and ensure product quality stability by setting process conditions in the laboratory. Thanks to the high-performance single extruder/Twin screw extrusion technology can help users optimize processing techniques, adapt to different product needs, and produce a variety of products to complete various processing tasks.

twin screw extruderTSE 20/40 D

TSE 20The extruder adopts a length of40DThe barrel. By adding a distance sleeve in the screw configuration, the cylinder length can be reduced to30perhaps20DThis way, your extruder can easily adapt to individual processing tasks. Can be done every10DLength, installation of measuring instruments and/Or an air vent. For this, the barrel can be configured to be able to close4A vent.

In addition, side feeding can also be performed.TSE 20The extruder barrel can be separated horizontally and tilted on both sides, which enables visualization of individual processing step evaluations and makes this type of extruder particularly suitable for research and development. This type of extruder can also be used as a standalone extruder.

Germanybrabender TSE 20/40Dtwin screw extruder

advantage:

Clam shell barrel;

Variable processing length;

Vertical and lateral feeding;

Interchangeable screw components;

electrical heating/Water heating;

Adjust the temperature to400℃.

performance parameter

Maximum torque:80Nm

Speed:

-max 1200rpmConfigure the gearbox4:1

- max. 350 rpm with Plasti-Corder ® Lab Station

- max. 200 rpm with Plasti-Corder ® Lab Station EC

Main feeding port and

Three openings (located at)10D、20D、30D）

Can be used for feeding and exhaust ports

The advantage lies in providing different aspect ratios without changing the length of the sleeve and screw

Additives can also be used in11Dand22DAdd side feeder at the position

Can handle3X3mmGranular material

The overall sleeve opens vertically

Can quickly monitor the status of materials at various locations

Quickly clean and analyze the extrusion process flow

Extruder sleeve:PM-HIPMaterial, special anti-corrosion treatment, reinforced type, high wear resistance

temperature control: eightDistrict(Electric heating and water cooling)

maximum temperature: 400 ° C

Maximum pressure: 300bar

Mold head connection: 2 3/4“Threaded ring

Water distribution system, including electromagnetic control valve cooling device

Electrical appliances are installed in different chambers

Cooling treatment device

Cooling power:15 kW at 90°C

Heating power:1.7 kW

Circulating pump:max5 bar/30 Ltr./min

Customer provides their own compressed air（4-6bar）And water

Plasti-Corder Lab-StationsLaboratory desktop workstation