ANKS-CJ-1 Microwave Resistance Tester for Catering Utensils

Instrument Introduction

The national standard GB18006.1-2009 "General Technical Requirements for Plastic Disposable Catering Utensils" requires microwave resistance testing for plastic disposable catering utensils, which is difficult to conduct according to the national standard using household microwave ovens. Mainly manifested in

1. Microwave power generally does not reach 2000W

2. High frequency heating performance test for microwave ovens in the national standard. For microwave ovens that belong to light load or near empty load, empty load is prohibited for household microwave ovensMagnetronThere is significant damage

3. Household microwave ovens do not have temperature measurement function

4. In the experimental requirements, power control, time control, and temperature measurement accuracy cannot be met

5. The furnace cavity is difficult to meet the requirements of large-sized and irregular set tableware

In this context, based on the national standard, we have developed and designed the FCJ2000 using our accumulated technology in microwave instrumentsMicrowave resistance tester for tableware.

main features

Multiple interlocking protection. Abnormal temperature, sensor malfunction, and automatic power-off protection when the furnace door is opened. The microwave leakage of the whole machine is much lower than the national standard.

Using a temperature controller to protect the core components of the microwave source and extend its service life. Adopt overcurrent protector to prevent excessive current.

The precision designed air circulation mode and corrosion-resistant exhaust pipe channel can quickly remove smoke and harmful gases.

Pull down buffer safety explosion-proof furnace door, locking self checking function, interlocking protection, preventing microwave leakage, and also resisting accidental explosions.

Adopting industrial PLC and color touch screen; Temperature or multiple temperature ranges can be set, and constant temperature operation can be set at a certain temperature; It can be set according to GB18006.1-2009 ９. １. Two steps of power and heating time, four steps of power and time, completed in one go.

technical parameter

1. Power supply: 220-240VAC 50/60Hz

2. Microwave frequency: 2450MHz,

3. Microwave power: 0-2000W continuous non pulse adjustable

4. Control system: PID，PLC， Color touch screen, USB interface can export data, can store multiple solutions, curve display

5. Microwave oven cavity, coated with multiple layers of corrosion-resistant PTFE both inside and outside.

6. Temperature measurement control: thermocouple temperature measurement, temperature measurement accuracy ± 1 ℃

7. Working temperature: The standard instrument has a high working temperature of 300 ℃

8. Working environment: 0-40 ℃, 15-80% RH; No conductive dust, explosive gases, or corrosive gases that can severely damage metals and insulation

9. Overall dimensions, approximately 650 * 550 * 500mm (width x depth x height)

10. Tableware placement area: approximately 370 * 370mm

11. Microwave leakage: At a distance of 5cm from the device, the microwave power is less than 2mW/cm2