CLAAS TRION 720 combine harvester product introduction

The all-new TRION combine harvester meets your personalized needs

The all-new TRION series combine harvester is a large-scale multifunctional intelligent combine harvester developed based on various crop conditions and diverse user needs in various regions around the world. Up to dozens of configuration combinations can meet the personalized and multi crop harvesting needs of different users in various regions of China. TRION adopts CLAAS advanced tangential axial flow harvesting technology and is equipped with the latest generation of Cummins National IV engines with strong torque, ranging from 367 horsepower to 435 horsepower. The dynamic power system can save up to 10% of fuel consumption. Multiple high-end configurations such as CEMOS automatic optimization system, TERRA TRAC rubber tracks, AUTO SLOPE automatic slope adaptation are available, allowing users to use technology equivalent to the highest end LEXION series combine harvesters.

- High performance: The optimized APS HYBRID hybrid threshing and separation system and JET TREAM powerful cleaning system ensure that the machine achieves maximum harvesting performance with lower fuel consumption, while achieving high operational efficiency and low grain loss.

Adaptability: The multi crop harvesting kit and quick change design allow for easy and quick switching from harvesting one crop to another, fully enjoying TRION's multi crop harvesting capabilities.

Intelligence: CEMOS driver intelligent assistance system can maximize TRION's operational performance and greatly reduce the workload of drivers.

Reliability: Optimized transmission design effectively improves maintenance convenience and fast accessibility, saving more time and costs. Wear resistant high-quality components ensure high reliability of machine operation.

Newly optimized APS HYBRID hybrid threshing and separation system TRION 720/730/740: equipped with an axial flow drum The 450mm diameter acceleration roller in the APS hybrid threshing device initiates an efficient threshing process, allowing you to achieve extremely high feeding rates. It significantly accelerates logistics, increasing from 3 meters per second to 20 meters per second.

Very high job performance and good adaptability to various job conditions and crops. Always maintain a high logistics speed to achieve a larger and more stable feeding volume, while reducing power demand and minimizing losses. Larger diameter (600 mm) threshing drum vs. TUCANO 570 (450 mm). The APS HYBRID system achieves maximum feeding through a large separation area (20% higher than TUCANO 570) and an active separation system. Although the width of the drum has become shorter, the separation area of the threshing concave plate has increased by 13% compared to TUCANO 570. The concave plate angle has been reduced by 6%, which can effectively reduce the breakage rate.

Quick and convenient multi crop harvesting configuration options

	The design of segmented threshing concave plates reduces the time required for switching between different crops. The optimal concave plate configuration can improve the quality of grain harvest and feeding amount, while minimizing the loss rate. Equipped with a threshing drum speed reduction device, it can switch between two speed ranges without the need for any tools, thereby achieving optimal speed adjustment to adapt to different crop harvests (such as grains, corn/soybeans).
	The APS HYBRID threshing device and separation device can be independently adjusted to achieve maximum separation efficiency. The optional wear-resistant and high-quality components for threshing and separation greatly improve the reliability of the machine.
	No tools required, convenient and fast TRION can save you a lot of time when changing different crop types. The entire conversion process is both convenient and easy, and does not even require any tools to adjust the speed of various components. 63% of the threshing concave plate areas can be replaced with just one action. Adjust the feeding into the bridge The height of the feeding auger can be adjusted without the need for tools. The label indicates the appropriate location. Replace threshing accessories Easily switch between pre separated concave sections through the stone collecting groove. The threshing concave section accounts for 63% of the threshing concave and can be easily extracted from the side. After harvesting wheat, TRION is ready to harvest corn.
	Switch speed Manually switch the speed range of the threshing drum reducer through a hydraulic valve. You can choose between two different intervals. There is a direct and clear marking on the switching valve for this. Harvesting small grain crops Small grain crops are very light crops. Therefore, adjusting the fan speed is very important. The two-stage adjustable fan drive system has two speed ranges, which can be adjusted by quickly releasing the clamp and resetting the drive belt. Cleaning machines Before harvesting seeds or at the end of the working season, the entire machine should be thoroughly cleaned. TRION provides you with excellent accessibility to all components. The threshing device can be accessed through the large maintenance holes on both sides of the machine. There is also sufficient space around the sieve box, axial flow drum, and grain tank to perform cleaning tasks.

The all-new JET Stream powerful cleaning system

Grain quality is your standard of measurement:

Stable cleaning, high performance reserve, and easy adjustment

Double air duct staircase

Large selection area

- Uniform airflow distribution

-6 turbine blades

3D cleaning system:

- It can also ensure stable cleaning performance on slopes like flat ground

Optional AUTO SLOPE:

Automatically adjust the fan speed according to the slope condition

1. Shake board

It can improve the cleaning ability of TRION and reduce the screening pressure at the same time. The plastic shaking plate can be removed through the stone collecting groove and easily cleaned.

2. Turbine fan

A powerful turbine fan provides sufficient reserves for harsh operating conditions. The hydraulic continuously variable transmission can be controlled through CEMOS AUTO CLEANING automatic cleaning.

3. Airflow balance channel

The long upward airflow channel provides continuous cleaning performance and achieves high separation in the first stage.

4. Straw Step Ladder

The first step is a dual air duct, which is 56% higher than traditional cleaning systems. This achieves a strong pre cleaning effect with a light sieve load.

5. 3D cleaning system

The maintenance free system runs in the background and adopts active horizontal control to evenly distribute materials on the upper screen. This ensures stable cleaning performance when working on slopes.

6. Miscellaneous residue removal

Residual threshing is the process of removing the last grain from an unthreshed wheat ear. The debris returns to the acceleration roller, spreads out, and is sent back to the threshing drum for secondary threshing.

The ultimate experience of harvesting efficiency and comfort

The maximum capacity of the grain tank can reach 12000 liters, and the fastest unloading speed can reach 130 liters per second. It takes less than 100 seconds to unload a whole warehouse of grain for consumption.

The grain tank, unloading drum, and agitator can be equipped with wear-resistant and high-quality components, greatly improving the reliability of the machine.	Large grain tanks and fast unloading greatly reduce parking and unloading time.

Large grain tank capacity

The maximum capacity of the grain tank is 12000 liters.

The unloading speed can reach up to 130 liters per second.

The swinging unloading nozzle can achieve precise unloading of grain.

Accurately measure yield and grain quality.

CLAAS PREMIUM LINE Platinum Edition high-quality wear-resistant parts extend the service life.

Optional swing type unloading nozzle enables precise unloading of grain trucks without time-consuming operation.

Comfort brings high performance

We know that a comfortable working environment will enable you to work better in the fields. That's why TRION's cab is designed to be so comfortable. In addition to significantly spacious head, shoulder, and legroom, it also adopts an intelligent control concept and a bright CEBIS display terminal, which can clearly display all the information you need.

Regardless of whether the weather is hot or cold, you will be in a comfortable environment. Optimized airflow ensures a suitable temperature inside the cab.

Whether you choose standard seats or premium leather seats, you will feel very comfortable even during the longest working days.

All items are safely stored in the storage compartment on the B-pillar or in the refrigerator under the passenger seat.

The digital radio with hands-free calling function and tablet stand always provides you with information.

LED working headlights, various versions and configurations of maintenance lighting, you can continue to work even after nightfall.

When carrying out tasks such as unloading grain or attaching cutting platform trailers, the camera system provides you with a clear view, increasing safety and convenience.

The CLAAS Comfort Cab simplifies your work with suitable temperature regulation, comfortable seats, and intuitive handling.

A more comfortable cab makes your long hours of work easier.

Unparalleled CEMOS automatic optimization system

Configure CEMOS automatic optimization system according to your specific needs

VARIO Grain Cutting Platform	CERIO Grain Cutting Platform
Folding cutting table	CONVIO/CONVIO FLEX Belt Cutting Platform
MAXFLEX flex table	SWATH UP Pickup Platform
GERINGHOFF sorghum harvester	GERINGHOFF corn harvester

TERRA TRAC rubber track　　

Third generation TERRA TRAC rubber tracks

Soil is the most important production foundation for human beings. Because it is impossible to increase further, we need to be able to obtain higher output from existing land. To achieve this, efficient machines are needed to protect the soil, and TERRA TRAC rubber tracks can achieve this.

The rubber tracks of the third generation TERRA-TRAC are equipped with large-diameter rollers, hydraulic and pneumatic suspension, improved track tension, and automatic liquid level compensation, resulting in a significant increase in traction. When working on damp, soft ground or slopes, there are almost no traces left, which can significantly simplify the work of grain trucks.

TERRA TRAC on the road

The maximum speed can reach 30 kilometers per hour

High driving safety and directional stability

Compared to wheeled models, the driving comfort is higher

TERRA TRAC in the fields

Compared to wheeled machines, it reduces soil pressure by 66%

Whether it is harvesting corn or working on damp land and slopes, it has better traction

Less slippage and higher stability on the slope

Low driving resistance and fuel consumption

TERRA TRAC Rice specific Track

Special track pattern, 890 millimeters wide

The tread pattern spacing is larger, making it easier for self-cleaning

High traction and load-bearing capacity

- Work on damp ground conditions without sinking

TERRA TRAC 635mm	TERRA TRAC 735mm
TERRA TRAC 890mm	TERRA TRAC 890mm rice specific

The 635mm track makes TRION more compact on the road, thereby increasing maneuverability.

Technical parameters of the Koleos TRION 720 combine harvester