Flute shaped card sleeve leather tube Flute shaped card sleeve leather tubeThe averaging tube is called the Annubar averaging tube. The Annubar averaging tube is developed based on the principle of measuring flow velocity using pitot tubes. Due to its low pressure loss, low manufacturing cost, and easy installation and maintenance, it is widely used for measuring the average velocity or flow rate of gases or liquids in various pipelines (square or circular pipes). Using a pitot tube to measure flow velocity is a mature and reliable measurement method.

Flute shaped card sleeve leather tubePrinciple and application of (averaging tube):
The flute shaped card sleeve pitot tube (averaging tube) is a hollow metal tube with multiple sets of total pressure holes drilled on the upstream side, which are located at the center points of each unit area and reflect the flow velocity within each unit area. As each total pressure hole is connected, the total pressure value at each point is averaged and transmitted to the high-pressure tapping port through the total pressure outlet tube.

Flute shaped card sleeve leather tubeThe length of the pitot tube inserted into the pipeline can be flexibly adjusted, which is both flexible and sealed, and easy to install

1. Coefficient: 0.61-0.68

2. Specification: 250-3000mm
3. Diameter: Ф6.0mm-Ф12mm

4. Material: Stainless steel
5. Measurement medium: gas, liquid, vapor compatible with stainless steel

6. Operating temperature: ≤ 900℃

Flute type card sleeve leather tube flute type card sleeve leather tube