Advantages and Characteristics:The positioning accuracy of Taiwan CPC silent linear guide MR12MN is relatively high. The special rolling friction method makes the dynamic and static friction force of the guide rail very small. When the bed is running, using the characteristic of the linear guide rail can effectively avoid the occurrence of slipping.

CPC Micro Ball Linear Guide MR Series

High load, high torque function:

The MR linear guide adopts a two column ball circulation design, and the ball groove adopts a Gothic structure with a contact angle of 45 degrees, which can achieve four-way equal load. Linear guides use larger diameter steel balls within effective space constraints to achieve high load and torque functions.

Dust prevention equipment:

The end face sealing design of MR linear guide rail standard equipment can effectively form a sealed dust-proof structure, improve the service life of linear guide rail, and reduce lubricant loss, ensuring long-term lubrication effect. The sealing lip specially designed for MR linear guide rail can balance low friction resistance without affecting smooth operation.

Linear guide material:

All steel components of MR linear guides, including linear guides, slide steel bodies, and steel balls, are made of quenched and heat-treated stainless steel.

Plastic parts with inverted buckle design strengthen the bonding mechanism, which can withstand higher operating speeds. Design:

When the CPC linear guide is running, its plastic end cap continuously bears the impact force generated by the steel ball's cyclic reflux and turning, and the faster the running speed, the greater the impact force There is an increasing demand for MR linear guides in automated design for high-speed operation scenarios.

Special design of reflux channel:

The unique steel ball return hole and return channel of the CPC linear guide MR series are composed of a fully enclosed plastic frame and plastic end caps, with a simple structure that can significantly reduce the contact area and collision opportunities between the steel ball and metal, effectively achieving low-noise operation. The reflux channel contains a specially designed oil storage groove, which can extend the lubrication cycle of the linear guide rail.

◆ High load and high torque function

◆ Strengthen the design of the sheet

◆ Special design of reflux channel

◆ End face dust-proof design

Embedded and inverted design

Lubrication and oil storage block design

◆ Accuracy level

The MR miniature ball linear guide series offers three precision levels of N, H, and P for design selection.

◆ Material

The MR miniature ball linear guide series uses stainless steel materials that have undergone quenching and heat treatment for all steel components, including the slide rail, slide steel body, and steel balls.

Sealed dustproof product design:

◆ New U series

SU Series - End and Bottom Sealing Plates

In addition to the standard end face seal, the newly designed slide seat has added a bottom seal to prevent foreign objects from entering the ball bearing track from below the slide seat, thereby extending the life of the slide seat.

ZU Series - End and Bottom Sealing Plates and Oil Storage Blocks

The newly designed bottom sealing plate can prevent lubricating grease from overflowing from under the sliding seat, and the built-in oil storage block is installed to further enhance the effect of fuel saving and prolong the re lubrication cycle.

◆ New UE series

SUE Series - End and Bottom Sealing Plates and Reinforcing Plates

The integrated bottom sealing plate enhances the dust-proof ability of the sliding seat bottom. The stainless steel reinforcement plate can prevent hard objects from hitting the plastic end cover from the end face, and the dust-proof effect is the best in the entire series.

ZUE Series - End and Bottom Sealing Plates, Strengthening Plates, and Oil Storage Blocks

The bottom sealing plate can prevent lubricating grease from overflowing from below the sliding seat, and the installation of an internal oil storage block further enhances the fuel saving effect.

◆ End face strengthening design

【 EE Series - End Face Sealing and Strengthening Plates 】

Using stainless steel reinforcement plates, the plastic end caps at both ends of the slider are completely covered with a full cover design, and stainless steel screws are used to lock above and below the steel body of the slider, enhancing the rigidity and wrapping of the end caps to withstand faster operating speeds; And the gap sealing design is adopted between the reinforcing plate and the slide rail, so that the stainless steel reinforcing plate also has the function of a scraping blade. Running speed Vmax=5m/s, amax=300m/s2 (can reach 60m/s2 without preloading)

EZ Series - End Face Seals, Reinforcing Plates, and Oil Storage Blocks

The built-in oil storage blocks at both ends of the sliding seat meet environmental protection requirements and reduce maintenance costs.

【 EU Series - End Face, Stainless Steel Bottom Sealing Plates and Reinforcing Plates 】

The protection of the stainless steel bottom sealing plate enables the EU series slide to prevent foreign objects from hitting and damaging the slide from the bottom. Therefore, this series of slides has the best protection capability of the entire series, and it is recommended to use them in environments with high-speed rail debris.

UZ series - End face, stainless steel bottom sealing plate, reinforcement plate and oil storage block

Oil storage blocks can provide better lubrication and oil storage capabilities for high rigidity sliding seats, reducing re lubrication time.

◆ Dustproof design

SS series - End face sealing sheet

The standard equipped end face sealing plate design can effectively form a sealed dust-proof structure, improve product life, and reduce lubricant loss, ensuring long-term lubrication effect. The specially designed sealing lip can balance low friction without affecting smooth operation.

◆ Environmentally friendly lubrication design

ZZ Series - End Face Seals and Oil Storage Blocks

The sliding seat has a sealed lubrication and oil injection design at both ends, which can bring lubricating oil to the track surface through the circulation of steel balls, achieving lubrication effect. The concealed oil storage block is available for design selection, which can ensure long-term lubrication effect, reduce maintenance burden, and demonstrate excellent lubrication ability during short stroke operation.