VIP member
CTQ-D100YA2-2F tracked down the hole drilling rig
CTQ-D100YA2-2F tracked hydraulic drilling rig adopts a new type of hydraulic rotary motor, which has the characteristics of high speed, high torque, a
Product details
The CTQ-D100YA2-2F tracked hydraulic drilling rig adopts a new type of hydraulic rotary motor, which has the characteristics of high speed, high torque, and low failure rate. This drilling rig has low gas consumption and is easy to move and position. It uses air and oil filters for three-stage filtration, reducing the wear of the diesel engine and thus improving its service life. The drilling rig has a compact structure with a turning radius of 2.8m. At the same time, the propulsion carriage has a telescopic compensation function. During drilling, the carriage is supported on the ground, and the drilling stability is good.
This drilling rig is mainly suitable for rock drilling of blasting holes in open-pit mining, water conservancy, power stations, road construction and other rock engineering projects.
Technical parameters
Bore diameter (mm) |
90—130 |
Bore depth (m) |
30 |
Walk speed (km/h) |
2 |
Once promotion (mm) |
2000 |
Grade ability (°) |
30 |
Working air pressure (Mpa) |
0.7—1.4 |
Chassis ground clearance (mm) |
260 |
Air consumption (m ³/min) |
7—15 |
Skid pitch angle of the carriage (°) |
Up and down, a total of 100 |
Host Power (Kw) |
33 |
Skid tilt swing angle (°) |
Left 35, right 10 |
Adapt to Rock Hardness (F) |
6—20 |
Skid compensation (mm) |
900 |
Dimensions (L * W * H) (mm) |
4300*2130*2160 |
Weight (Kg) |
2900 |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-