Carbolite AAF-BAL ashing furnace

1、 Product Introduction:

The AAF-BAL thermogravimetric analysis (TGA) ashing furnace is equipped with a balance that can monitor the combustion weight loss of the sample in real-time throughout the entire heating process.

The AAF-BAL ashing furnace integrates a balance for combustion weight loss (LOI) analysis. Real time monitoring of the weight changes of samples during combustion, such as determining the organic content in materials such as sediment, sludge, soil, and waste, as well as testing inorganic materials such as cement, lime, calcined bauxite, and refractory materials.

2、 Standard parameters:

1. 3216CC, a slope heating and insulation controller

2. The heating element is protected by silicon carbide felt to prevent corrosion from carbon and corrosive gases

3. Heating on both sides

4. The balance and control system operate independently of each other

5. The maximum weighing capacity of the balance is 3kg, with a resolution of 0.01g (other specifications of balances can be provided)

3、 Optional accessories:

1. High end version: The balance can communicate with the European EPC 3008P10, and temperature and weight can be recorded through iTools software

2. The advanced version of the Nanodac controller can be used to record weight and temperature data. You also need to choose the following option: nanodac controller. The data recording is completed in nanodac and can be downloaded to the "Review Lite" software that comes with nanodac. The data can be archived to a USB flash drive or connected to a network server via Ethernet

3. Over temperature protection (to protect valuable samples or for unmanned operations)

4、 Technical parameters:

5、 Attention:

1. The insulation power is measured at 500 ° C

2. The heating rate is measured under no-load operation with the temperature set at 100 ° C below the maximum temperature

3. The maximum power and heating time are both based on a 240V power supply

4. Size of control box (400 x 170 x 500 mm)