Carbolite ABF ashing furnace with tail gas combustion device

1、 Product Introduction:

The ashing furnace equipped with Carbolite ABF and exhaust gas purification device is particularly suitable for ashing larger sample materials, such as biomass, as its combustion may produce a large amount of smoke.

The furnace serves as the main combustion chamber and is equipped with a double-layer sample holder. The waste gas generated by the process is further treated by exhaust combustion purification.

2、 Standard parameters:

1. Maximum working temperature 800 ℃

2. Furnace cavity volume 28L

3. The carbon content of batch combustion cannot exceed 40g

4. Double layer sample basket with handle and tray

5. Programmable EPC3016P1 Controller

6. Independent control of the applied force temperature can reach 950 ℃

7. Silicon carbide bottom plate protection heating wire

8. The power supply adopts three-phase power supply

9. Ethernet communication interface

3、 Optional accessories:

1. A series of precision digital controllers with digital communication options, multi-stage programmers and data recorders, as well as digital communication interfaces

2. Over temperature protection (recommended for protecting valuable samples or unattended operations)

3. Optional floor stand

4、 Technical parameters:

5、 Attention:

1. The insulation power is measured at 500 ° C

2. The heating rate is measured under no-load operation with the temperature set at 100 ° C below the maximum temperature