Carbolite CWF Box Furnace

1、 Product Introduction:

The Carbolite CWF box furnace combines traditional knowledge and modern design technology to provide efficient and reliable heat treatment, making it easy to replace heating elements and maintain.

2、 Standard parameters:

1. Maximum operating temperature of 1100 ° C, 1200 ° C, or 1300 ° C

2. Furnace volume 5, 13, 23, 36 or 65L

3. PID301 standard controller, single segment program control (CWF&CWF-B)

4. PID3216CC standard controller, single segment program control

5. Open the door vertically to ensure that the scorching furnace door is kept away from the operator

6. Furnace volume 5/13/21/23L equipped with damping type upper door

7. Delay start and timer function

8. The heating element backing, furnace entrance, and furnace bottom are made of wear-resistant alumina insulation material

9. Low energy consumption lightweight insulation material

10. The heating element radiates heat freely, ensuring good temperature uniformity

11. Easy installation and maintenance of heating wire

12 CWF-B: Enhanced furnace airflow, thanks to higher chimneys and furnace door air intakes, enables more complete combustion

13 CWF-BAL: Integrated balance scale, independent control system with furnace

14 CWF-BAL: The software that comes with the balance can read data through a computer

15 CWF-BAL: The maximum weight of the balance is 3kg, with an accuracy of 0.01g (other specifications of balance can be provided)

3、 Optional accessories:

1. A series of precision digital controllers with digital communication options, multi-stage programmers and data recorders, as well as digital communication interfaces

2. Over temperature protection (recommended for protecting valuable samples or unattended operations)

3. A series of metal process chambers, with a maximum operating temperature of 1150 ° C in atmospheric environment

4. Can provide customized models of applications that comply with AMS2750F (NADCAP) standards

5 CWF-BAL: The upper limit of the balance range is 8 kg, with an accuracy of 0.1 g

4、 Technical parameters:

5、 Attention:

1. The heating rate is measured under no-load operation with the temperature set at 100 ° C below the maximum temperature

2. The insulation power is measured under continuous working conditions

3. The maximum power and heating time are both based on a 240V power supply

4. The volume of the uniform temperature zone is less than the total volume of the oven

5. Control cabinet size