Carbolite ELF Laboratory Box Furnace

1、 Product Introduction:

The Carbolite ELF laboratory furnace includes three desktop models designed for light sample loading and conventional use up to 1100 ° C. These laboratory furnaces have simple sliding doors and ceramic chimneys installed on the top. Low heat storage insulation materials and spiral heating elements embedded on the side of the furnace that freely radiate heat provide effective heating.

2、 Standard parameters:

1. Maximum working temperature 1100 ℃

2. Furnace cavity volumes of 6, 14, and 23L

3. Sliding door, air circulation design to ensure low temperature of the outer box

4. PID301 standard controller, single segment program control

5. Delay start and timer function

6. Vacuum formed low thermal insulation material

7. Hard ceramic hearth

8. Top ceramic chimney emits exhaust gas

3、 Optional accessories:

1. Over temperature protection (recommended for protecting valuable samples or unattended operations)

4、 Technical parameters:

5、 Attention:

1. The heating rate is measured under no-load operation with the temperature set at 100 ° C below the maximum temperature

2. The insulation power is measured under continuous working conditions

3. The external dimensions are measured when closing the furnace door, including the chimney dimensions

4. The volume of the uniform temperature zone is less than the total volume of the oven