Carbolite FST/FZS 1300 ° C Open close Tube Furnace

1、 Product Introduction:

The single zone temperature controlled FST and three zone temperature controlled FZS open closed tube furnace can be used both vertically and horizontally. The highest temperature can reach 1300 ° C.

The open closed tube furnace is very convenient for rotating the working tube or the reactor has already been flanged. The open close design can also allow the sample to cool quickly. The heat dissipation holes on the furnace shell are designed to cool the furnace body by convection. The upper part of the furnace body has a handle, and two quick release locks can lock the furnace body and also facilitate opening. The insulation layer is composed of ceramic fiber material and embedded with heating wires made of iron chromium aluminum alloy. The safety lock can protect the operator, and when the furnace body is opened, the heating power supply is cut off.

2、 Application example:

Thermal decomposition, aging, annealing, brazing, calcination, catalyst research, CIM， Coating, CVD， Degassing, drying, hardening, MIM， Small equipment, pyrolysis, sintering, welding, sublimation, synthesis, tempering, testing fuel cells, thermocouple calibration

3、 Standard parameters:

1. Maximum operating temperature 1300 ° C

2. 24 segment programmable temperature controller: equipped with EPC3016P1 FST and CC-T1 FZS

3. Over temperature protection

4. Maximum working pipe outer diameter 150mm

5. Single zone heating length: 200, 500 or 1000mm

6. Three zone heating length: 500 or 1000mm

7. Open and close design, suitable for work pipes or reactors with installed flanges

8. Horizontal or vertical use

9. Long service life, stable temperature control

10. High quality S-type temperature control thermocouple

11. Ceramic fiber insulation material with low heat storage capacity

12. High quality 5mm diameter iron chromium aluminum alloy heating element

13. An independent control cabinet with 3-meter cables, plugs, and sockets between it and the furnace body

14. Ethernet communication interface

4、 Optional accessories:

1. A series of precision digital controllers with digital communication options, multi-stage programmers and data recorders, as well as digital communication interfaces

2. Over temperature protection (recommended for protecting valuable samples or unattended operations)

3. Work pipes of various sizes and materials

4. Open and close tube furnace, sturdy semi-circular ceramic plates are used to protect heating elements and can also hold samples

5. L-shaped bracket for vertical and/or horizontal use

6. Thermal insulation plugs and radiation shielding plugs prevent heat loss and improve temperature uniformity

7. Controllable atmosphere and vacuum components

8. Vacuum components can be selected from mechanical pumps or turbo molecular pumps

9. Large caliber work pipe

10. Longer heating length

11. Automatic opening device for furnace body

12. Inert gas reflux flange

13. Oxygen probe for inert gas supply system

14. The cable length between the furnace body and the control cabinet is 6 meters

15. Gas packaging with manual valve

16. Laboratory gas safety system, capable of supplying hydrogen gas above 750 ° C

17. Gas packaging with electric valve, capable of accommodating up to 3 types of gases

5、 Technical parameters:

6、 Attention:

1. When using ceramic working tubes, the heating rate should not exceed 5 ℃/minute

2. 220-240V is a single-phase power supply, 380-415V is a three-phase power supply

3. The length of the uniform temperature zone of the horizontal tube furnace is measured when it is 100 ° C below the maximum temperature and shielded plugs are installed at both ends - Power supply: a = 3 phase 380 - 415 V / b = 3 phase 480 V / c = 3 phase 200 - 210 V / d = 3 phase 220 - 240 V / e = 1 phase 220 - 240 V