VIP member
Central transmission scraper
Name: The central drive scraper collects sludge into the central collection tank through deceleration drive and suspended component transmission, and
Product details
Working principle of central drive scraper
Through deceleration drive and transmission of suspended components, the sludge is scraped by a scraper to the central sludge collection tank, and discharged outside the tank by static water pressure or pump. Adopting middle water inlet and sludge discharge, and surrounding drainage to ensure uniform water flow. Utilizing liquid level difference self-priming sludge discharge, equipped with floating slag scraping and removal device and overload protection device.
Characteristics of Central Drive Mud Scraper
1. The transmission part adopts dual electrical and mechanical overload protection, making operation safer and more reliable.
2. The underwater part is made of stainless steel, which is corrosion-resistant and has a long service life. [1]
Main structure of central drive scraper
The transmission scraper of this center is mainly composed of a driving device, a main shaft, railings, steel beams, vertical bars, supports, scraper plates, overflow weir plates, pull rods, small scrapers, underwater bearings, stabilizing tubes, electric control boxes and other components.
Our transmission scraper can be widely used in sewage treatment projects in urban, chemical, textile, metallurgical and other industries. Its structure is reasonable, efficient, and easy to operate and maintain, making it an ideal supporting facility for sewage treatment projects
Main performance of central drive mud scraper
(1) The bottom of the pool is scraped with mud, and the driving device adopts a deceleration driving mechanism for transmission, with a compact structure and high mechanical efficiency;
(2) Diagonal scraper with good continuity and high efficiency in collecting mud; Install a scraper rubber plate underneath the stainless steel scraper plate to ensure thorough cleaning of the scraper and prevent any floating mud.
(3) The slope ratio of the pool bottom is 1:10, and the sludge resistance during scraping can be ignored.
(4) The main beam is made of square steel with high structural strength. It adopts hot-dip galvanizing and then spray coating technology, which has strong anti-corrosion performance. The main beam can also be directly poured with concrete, which saves more investment.
(5) Easy to operate and capable of remote control.
Through deceleration drive and transmission of suspended components, the sludge is scraped by a scraper to the central sludge collection tank, and discharged outside the tank by static water pressure or pump. Adopting middle water inlet and sludge discharge, and surrounding drainage to ensure uniform water flow. Utilizing liquid level difference self-priming sludge discharge, equipped with floating slag scraping and removal device and overload protection device.
Characteristics of Central Drive Mud Scraper
1. The transmission part adopts dual electrical and mechanical overload protection, making operation safer and more reliable.
2. The underwater part is made of stainless steel, which is corrosion-resistant and has a long service life. [1]
Main structure of central drive scraper
The transmission scraper of this center is mainly composed of a driving device, a main shaft, railings, steel beams, vertical bars, supports, scraper plates, overflow weir plates, pull rods, small scrapers, underwater bearings, stabilizing tubes, electric control boxes and other components.
Our transmission scraper can be widely used in sewage treatment projects in urban, chemical, textile, metallurgical and other industries. Its structure is reasonable, efficient, and easy to operate and maintain, making it an ideal supporting facility for sewage treatment projects
Main performance of central drive mud scraper
(1) The bottom of the pool is scraped with mud, and the driving device adopts a deceleration driving mechanism for transmission, with a compact structure and high mechanical efficiency;
(2) Diagonal scraper with good continuity and high efficiency in collecting mud; Install a scraper rubber plate underneath the stainless steel scraper plate to ensure thorough cleaning of the scraper and prevent any floating mud.
(3) The slope ratio of the pool bottom is 1:10, and the sludge resistance during scraping can be ignored.
(4) The main beam is made of square steel with high structural strength. It adopts hot-dip galvanizing and then spray coating technology, which has strong anti-corrosion performance. The main beam can also be directly poured with concrete, which saves more investment.
(5) Easy to operate and capable of remote control.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-