1、 Oil and gas dual recovery unit

1. Schematic diagram of dual recovery of waste heat, oil and gas from air compressor:

2. Introduction to the dual recovery unit for waste heat, oil and gas in air compressors:

Adding a high-temperature compressed air heat recovery device on the basis of a single unit to recover and utilize the heat in high-temperature gas, fully utilizing the waste heat of the air compressor, and achieving high heat recovery utilization efficiency.
After being heated by the air heat recovery device, the cooling water is used as preheating water for the primary waste heat unit, significantly improving the heat transfer efficiency.
After the full recovery of oil and gas waste heat, the temperature decreases, greatly reducing the energy consumption of the air compressor cooling fan.

3. Technical parameters of air compressor waste heat single recovery unit:

2、 Secondary recycling unit

1. Schematic diagram of secondary recovery of waste heat from air compressor:

2. Introduction to the waste heat secondary unit of the air compressor:

To address the issue of easy scaling, a secondary heat exchange system is added to the primary unit. The high-temperature oil and tap water of the air compressor are isolated and exchanged using two heat exchangers, completing the secondary heat exchange within a single unit!
One heat exchange is carried out by circulating the air compressor oil and soft water, ensuring high safety and performance during operation;
The secondary heat exchange adopts a stainless steel detachable plate heat exchanger for pure water and tap water heat exchange, with strong corrosion resistance and easy cleaning.
Automated operation of system security, 100% prevention of water leakage accidents!

3. Technical parameters of air compressor waste heat secondary unit:

1. Structure diagram of centralized secondary recovery principle for air compressor:

2. Introduction to the Centralized Secondary Air Compressor Unit:

The secondary centralized heat exchange unit adds a secondary heat exchange system outside the primary heat exchange unit, which is suitable for multiple primary heat exchange units to perform centralized secondary heat exchange, effectively reducing costs and improving efficiency.
To address the issue of easy scaling, the high-temperature oil of the air compressor and tap water are isolated using two heat exchangers, with soft water used as the heat transfer medium in between to avoid the risk of damage from tap water to the oil heat exchanger. The secondary heat exchanger adopts a detachable plate heat exchanger, which is convenient for users to disassemble and wash at any time.
The system can operate safely and automatically, with 100% prevention of water leakage accidents in the system's air compressor.

3. Technical parameters of the centralized secondary unit of the air compressor:

Online inquiry