Chlorine dioxide generator dosing factory direct sales

Attention should be paid to protection during the dosing process of chlorine dioxide generators. Chlorine dioxide has an irritating odor at high concentrations, and excessive inhalation can cause headachese xinDue to the symptoms, it is recommended to wear a safety gas mask as much as possible during the medication process. If the raw materials used are hydrochloric acid and sodium chlorate (or a mixture of finished chlorine dioxide AB agents), it is important to note that the two agents should not come into direct contact. The hydrogen gas generated by the generator should be discharged outdoors, and the entrance should be away from the fire source. Safety explosion-proof lights should be used for lighting in the operating room, and good ventilation facilities should be provided indoors. The generator has a water inlet interface and a disinfectant outlet interface. The diameter of the external pipeline should be consistent with them, and a check valve should be installed at the disinfectant outlet. Iron or plastic pipes can be used for the inlet pipeline, while polyvinyl chloride or ABS plastic pipes must be used for the outlet pipeline. Simple anti-corrosion flooring should be installed between equipment rooms. Prevent disinfectant leakage from affecting human health. If the raw material is an electrolytic chlorine dioxide generator made of salt, the raw materialzuihaoJust make sure it doesn't get damp. If it gets damp and clumps, it's not easy to add or dissolve.

Chlorine dioxide generator dosing factory direct sales

The chlorine dioxide generator is a chemical method chlorine dioxide generator. When using it, put hydrochloric acid into the tank and sodium chlorate into tank B. Turn on the equipment and you're done. Finished chlorine dioxide disinfectant can also be used instead of hydrochloric acid and sodium chlorate. Finished chlorine dioxide agent A is placed in tank A, and finished chlorine dioxide agent B is placed in tank B.