Coleparmer flame photometer (economical) from the United States

Product features:

Coleparmer economical flame photometer from the United States, suitable for routine determination of sodium and potassium, easy to maintain, fast and accurate testing. When the flame suddenly goes out, it automatically shuts off the gas to ensure the personal safety of the operator

Display: 3-1/2LED, 1.3cm high

Measurement range: 0-199.9ppm

Sensitivity: 3-100ppm (Na+, K+filter)

5-100ppm (Ca+, Li+filter)

100-200ppm (Ba+filter)

Specificity: When the concentration is equal to the concentration of the test sample, the interference level is less than 0.5%

Repeatability: better than ± 1% C.V

Linear: better than ± 2%

Sample suction rate: 2-6ml/min

Stable reading time: about 8 seconds

Record output: 100mv

Intake requirements: 6 liters per minute, pressure of 14psi, oil-free dry air

Gas supply: high-purity propane, butane, propane butane mixer, with a regulated pressure of approximately 2.06Bar; Natural gas 7.6-25.4 cm W.G

External dimensions (width, height, length, cm): 36 × 42 × 30

Power supply: 230V, 50/60HZ

Standard configuration: equipped with one Na+, K+, Ca+, Li+, Ba+filter, one 2-meter-long gas pipe, one air pipe, and connectors

Coleparmer flame photometer (economical) from the United States