Shijiazhuang Aerospace Automation Technology Co., Ltd
Home>Products>Compact pneumatic thin film regulating valve
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    137-2278-0778
  • Address
    12-1-502 Rongguo Garden, No. 528 Zhongshan East Road, Chang'an District, Shijiazhuang City
Contact Now
Compact pneumatic thin film regulating valve
The ZJHP (M) type pneumatic single seat (sleeve) regulating valve consists of a pneumatic multi spring thin film actuator and a low flow resistance st
Product details

The ZJHP (M) type pneumatic single seat (sleeve) regulating valve consists of a pneumatic multi spring thin film actuator and a low flow resistance straight through single seat valve (sleeve valve). The single seat valve body is directly connected to the single seat cover with a guide structure, and the valve core is a plunger type structure. Compared with ordinary single seat valves, it has the characteristics of small volume, light weight, and large flow rate, and is suitable for situations with high flow rate and strict leakage requirements.
1、 Valve body
Valve body form: Straight through single seat (sleeve) inverted S-shaped cast valve
Nominal diameter: DN20~300mm
Nominal pressure: PN1.6 4.0 6.4MPa
Connection type: flange type according to JB78-59 JB/T79.2-94 concave type
Material: HT200 ZG230-450 ZG1Cr18Ni9Ti ZG0Cr18Ni12M02Ti
Upper valve cover: room temperature type -20~+200 ℃
Heat dissipation type -40~+450 ℃
Packing: V-shaped polytetrafluoroethylene, flexible graphite, stainless steel corrugated pipe
Valve components
Valve core type: upper guide single seat (sleeve) plunger type valve core
Flow characteristics: linear characteristics, equal percentage characteristics, or quick opening characteristics
Material: 1Cr18Ni9Ti 0Cr18Ni12Mo2Ti
Flow characteristic diagram

Executing Agency:

Form: Multi spring thin film actuator gasket: rubber asbestos board, 1Cr18Ni9Ti
Diaphragm material: Nitrile rubber clip reinforced polyester fabric Spring range: 20-100 (40-200, 80-240, 20-60
Compression spring: 60Si2Mn 60-100) KPa
Push rod: 2Cr13 Gas supply pressure: 0.14 0.16 0.28MPa
Membrane cover: A3 Air source connector: Internal thread M10X1
Lining: 2Cr13 Environmental temperature: -30~+70 ℃
Valve action type: gas open type, gas closed type

Main technical parameters


nominal
orifice
(mm)
valve seat
diameter
(mm)
Rated flow coefficient Kv rated
trip
(mm)
Effective area of film in cm2 Inherent adjustable ratio Environmental temperature ℃ Basic error return difference dead zone rated flow coefficient leakage rate
straight line Equal percentage
G3/4 3
4
5
6
7
8
0.08
0.12
0.20
0.32
0.50
0.80
10 220 50:1 -40~+85 Without locator ± 5%


Equipped with locator ± 1%
Without locator ± 3%


Equipped with locator 1%
Without locator ± 3%


Equipped with locator 0.4%
±10% Single seat 10-4Valve capacity (sleeve 10)-3Valve rated capacity
20 10 1.8 1.6 10 350
12 2.8 2.5
15 4.4 4
20 6.9 6.3
25 25 11 10 16
40 32 17.6 16 25
40 27.5 25
50 50 44 40
65 65 69 63 40 560
80 80 110 100
100 100 176 160
150 125 275 250 60 900
150 440 400
200 200 690 630
250 250 1000 900 100 1400
300 300 1600 1440

Outline drawing of ZJHP/M pneumatic control valve



Dimensions of ZJHP/M Pneumatic Thin Film Control Valve



nominal
orifice
L(mm) H(mm) H1(mm) ФA
(mm)
ANSI125FF
ANSI150RF
JIS10KFF.RF
PN0.6、1.6
ANSI300
JIS20
30KRF
PN4.0
ANSI600
JIS40K.RF
PN6.4
ordinary high temperature PN6 PN16 PN40 PN64
G3/4″ 120 120 120 253 31 31 236
20 181 194 206 398.5 548.5 45 52.5 65 285
25 184 197 210 410.5 560.5 50 57.5 70
40 222 235 251 455 620 65 75 85
50 254 267 286 457.5 627.5 70 82.5 90
65 276 292 311 610 790 80 92.5 102.5 360
80 298 317 337 622 8.7 95 100 107.5
100 352 368 394 640 850 105 110 117.5 125
150 451 473 508 870 1130 132.5 142.5 150 172.5 470
200 600 610 650 890 1150 160 170 187.5 207.5


Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!