Composite rod corrugated compensatorThe FSL type is composed of two or three sections of corrugated pipes, short middle connecting pipes, and long pull rods. The long pull rod is not a load-bearing component, with a simple structure and a large compensation amount. It is generally used for pipelines with low fatigue cycles and requiring large compensation amounts.
Example of axial type compound tension rod corrugated compensator:
For example:0.6TFL200*12J
Indicating: The work pressure is0.6Mpa， An axial type compound tension rod corrugated compensator with a diameter of DN=200mm and a wave number of 12, connected by a connecting pipe.
After the installation of the axial compound corrugated compensator on site, the nuts on both sides behind the ears must be retracted to the limit nuts. This compensator can absorb large axial displacements. For compensators with a large number of corrugated pipes, the outer cover serves as a protective device to ensure that the compensator is not damaged during transportation or installation. Moreover, it ensures the stability of the compensator during operation, and due to the presence of the outer cover, the insulation operation of the compensator becomes simple and easy to implement.
Production parameters of axial type compound tension rod corrugated compensator:
Caliber:DN32-DN3000
Pressure level:0.1Mpa—2.5Mpa
Connection method:1. Flange connection (flanges are supplied according to the machine standard JB81-59, or can be supplied according to national standards, chemical standards, or other standards according to user requirements); 2. Take over the connection
Product axial compensation amount:72mm-500mm

Circular corrugated compensator, compound pull rod axial corrugated compensator