Design description of temperature and humidity controller:

Main functions:

One way is condensation, and the other way is temperature controlled with precision digital display. Press the key to set the control value and automatically control the corresponding load to adjust the temperature and humidity of the environment.

Technical features:

Power supply voltage: AC220V, 50-60Hz

Control output: 3A, 250VAC (resistive load)

Display device: LED display dial scale display

Set temperature: 0-100℃

Set humidity: 0-99.9RH

Set hysteresis: temperature 0-9.99 ℃, humidity 1-9.99% RH

Accuracy: Temperature ± 5 ℃, humidity ± 4% RH

Control mode: upper limit, lower limit

Environmental temperature: -10 ℃ to 70 ℃

Environmental humidity: 45 to 85% RH

Mechanical lifespan: at least 3000000 cycles

Volume: 48×48×78mm³

Installation method:

Embedded: Drill 45+189 × 45+189 mm ² holes on the installation panel, and fix the monitor on the panel through the installation bracket

Description of Condensation Controller Design:

Main functions:

One way condensation control, when the humidity is too high or condensation is about to occur, start the load and adjust the temperature to the set value.

Two way condensation control, when the temperature is too high or there will be condensation for a long time, start the load and adjust the temperature to the set value. It can simultaneously control two different environments or achieve a dual insurance effect by controlling one environment.

Technical features:

Condensation control: 88% RH ± 5% RH (at 20 ℃)

Response speed: typical value ≤ 5S

Load control: manual/automatic control

Output: One time working voltage, rated power resistive load AC220V/5A

Volume: 48×48×78mm³;

Installation method:

(1) Base type: Fix the 8-core relay base on a 35mm guide rail or directly fix it on the mounting plate through mounting screw holes.

Embedded: Drill 45+189 × 45+189 mm ² holes on the installation panel, and fix the monitor on the panel through the installation bracket

Description of Temperature Controller Design:

Main functions:

One way temperature control, digital display of ambient temperature and control temperature. Users can switch between setting temperature and temperature rise and fall working modes by pressing the key.

Technical features:

Temperature control range: 0℃～1OO℃； Accuracy: 0.5% ± 1 word)

Parameter setting: Control value: 0-100% of full range

Return the difference 1-20℃； Sensor error correction:- 20～20℃

Display mode: Three digit LED digital tube directly displays the measured value and control value

Output: One time working voltage, rated power resistive load AC220V/3A

Volume: 48×48×78mm³

Installation method:

Embedded: Drill a 45 °× 45 °² hole on the installation panel and secure the monitor to the panel through the mounting bracket

Design description of condensation temperature controller:

Main features:

One way is condensation, and the other way is temperature controlled with precision digital display. Press the button to set the control value and automatically control the corresponding load to adjust the temperature and humidity of the environment.

Technical features:

Power supply voltage: AC220V,50-60Hz

Control output: 3A, 250VAC (resistive load)

Display device: internal set control values

Set temperature: 0-1000 ℃

Set humidity: 0-99.9RH

Set hysteresis: temperature 0-9.99 ℃, humidity 1-9.99% RH

Accuracy: Temperature ± 5 ℃, humidity ± 4% RH

Control mode: upper limit, lower limit

Environmental temperature: -10 ℃ to 70 ℃

Environmental humidity: 45 to 85% RH

Mechanical lifespan: at least 3000000 cycles

Volume: 48 × 48 × 78mm ³

Installation method:

Embedded: Drill a 45 °× 45 °² hole on the installation panel and secure the monitor to the panel through the mounting bracket