1. Product Introduction

The noise and dust monitoring station is a monitoring equipment specifically designed for construction projects in progress. This device has 1 channel of louver box (temperature, humidity, noise, PM2.5, PM10, air pressure, lighting, TSP) collection, 1 channel of wind speed collection, 1 channel of wind direction collection, 2 channels of switch quantity collection, 2 channels of 4-20mA analog quantity collection, 2 channels of relay output (relay 1 can be connected to the on-site secondary relay to control the fog cannon by default), and 1 channel of 485 slave station output; This device can upload data to the monitoring software platform through GPRS, and the host can also be connected to an external LED screen (54cm * 102cm) to display real-time numerical information.

2. Technical parameters

3. Product selection

4. Equipment installation

4.1 Pre installation inspection of equipment

Equipment List: (The number of equipment varies depending on the selection, and the specific details are subject to the actual situation on site)

One louver box multiple in one transmitter

One wind speed sensor

One wind direction sensor

■ One upright pole (1 for a length of 2m, 2 for a length of 3m consisting of 1.5m)

Cross beam (1 U-bolt, 2 0.75 nuts)

Integrated noise and dust machine (including 1 key)

3 pallets (2 black and 1 white), 12 sets of M4 * 18 screws

2 clamps and 4 M10 * 20 screws

4.2 Installation of collection terminal

Use black film for wind speed and direction, and white film for louver box. Pay attention to orientation when installing wind direction