1. Application of air shower room
The air shower room is a necessary passage for personnel to enter and exit the clean room, and also serves as a closed clean room for personnel purification and prevention of outdoor air pollution in the clean area. In order to reduce the large amount of dust particles caused by personnel entering and leaving, the clean airflow filtered by the high-efficiency filter is sprayed onto people from all directions through a rotatable nozzle, effectively and quickly removing dust particles. The cleaned dust particles are then filtered by the primary and high-efficiency filters and recycled back to the air shower area
2. Characteristics of air shower room
The outer frame is made of steel plate with electrostatic spraying (ivory white), the front and rear doors, the foot pedal is made of all stainless steel, the domestic high-efficiency filter, the three-phase low-noise DF-7 fan, and the dual door EFF electronic interlock,
Opel brand door closer, infrared sensing switch, automatic air shower system, PLC control panel with voice prompts for air shower process.
3. Technical parameters of air shower room
Model/Parameters |
SDFL1310-1 |
SDFL1320-2 |
SDFL1340-4 |
Dimensions (mm) |
1290×1000×2050 |
1290×2000×2050 |
1290×4000×2050 |
Internal dimensions (mm) |
790×920×1930 |
790×1920×1930 |
790×3920×1930 |
Jet velocity (m/s) |
18~20 |
||
Ventilation rate (times/h) |
380 |
770 |
770 |
Wind nozzle (piece) |
12 of them |
24 of them |
48 of them |
Wind bath time (s) |
The initial factory setting is 10S-99S (adjustable) |
||
filter |
Efficient filter (efficiency ≥ 99.99%), primary filter can clean synthetic filter material (≥ 5um counting efficiency ≥ 35%) |
||
Main material of the box |
1.5um cold-rolled steel plate, surface treated, matte color (or fully stainless mesh) |
||
Door material |
Sanding stainless steel |
||
Door interlock method |
When exposed to the wind, the two doors are locked, and normally the two doors are electronically interlocked, allowing one of them to be opened |
||
power supply |
380V 50HZ |
||
lighting lamp |
20W×1 |
20W×2 |
20W×4 |
Power consumption (KW) |
0.75 |
1.5 |
4.5 |
Weight (Kg) |
355 |
412 |
1150 |
Note: Non standard specifications can be customized according to customer requirements
