Crude oil closed dehydration unitperformance index
Analysis range: 0-100%
Analytical liquid volume: standard 500mL, 1000mL, 1500mL, 2500mL, 5000mL (or customized according to user requirements)
Convenient oil pouring port: There are three specifications of inner diameter: φ 34, φ 45, and φ 50. (For vessels with a capacity of less than 1500mL, only the diameter 34 can be used and placed in the center of the vessel cover; for vessels with a capacity of 2500mL and above, these three specifications are acceptable. The diameter 34 and diameter 45 can be placed in the center or side of the vessel cover, while the diameter 50 can only be placed in the center of the vessel cover.)
Oil water separation time: ≤ 150 Min
Residual moisture content: ≤ 0.5%
Temperature control of kettle body: room temperature~120 ℃ (or customized according to user requirements)
Pressure control inside the kettle: 0-0.6MPa (or customized according to user requirements)
Power consumption: Heating ≤ 1KW, dehydration ≤ 20W
Processing time: 1-3 hours
Residual moisture content: ≤ 0.5%
Heating temperature control: room temperature~120 ℃
Pressure inside the kettle: ≤ 0.5MPa
Power supply: Voltage AC 220V ± 10%
Frequency: 50 Hz ± 5%

Crude oil closed dehydration unitSuitable for dehydration treatment in crude oil oil analysis, especially for heavy oil dehydration. As an industry standard analysis method, this series of instruments has been widely promoted and applied in petroleum and petrochemical geological laboratory departments such as oil production plants, oil production measurement stations, geological science institutes, oil production technology institutes, refineries (electric desalination), and relevant research and teaching laboratories in major oil fields across the country.